Global parameters

The SeisComP configuration uses a unified schema to configure modules. Modules which use the SeisComP libraries can read this configuration directly and share global configuration options like messaging connections, database configurations, logging and much more. There are still some modules that do not use the libraries and are called standalone modules such as seedlink and slarchive. They need wrappers to generate their native configuration when seiscomp update-config is run.

Global parameters can be used by many modules. Thus multiple configuration can be avoided. The parameters are read from file in the following order:

1. @SYSTEMCONFIGDIR@/global.cfg

2. @CONFIGDIR@/global.cfg

Parameters from @CONFIGDIR@ override parameters from @SYSTEMCONFIGDIR@.

Most trunk modules read the configuration from the global configuration which can be overridden by the module configuration. Read the concept section on modules and the concept section on the configuration for more details.

Though it is easy to create the configuration by directly editing the configuration files, it is even more convenient to use a graphical configuration tool. SeisComP ships with scconfig, a graphical configuration and management tool which makes it easy to maintain module configurations and station bindings even for large networks. It has built-in functionality to check the state of all registered modules and to start and stop them.

The configuration is divided into three parts: stations, modules and bindings.

Station meta data

Station meta-data is a fundamental requirement for a seismic processing system and for SeisComP. Read the inventory section in concepts for more details.

Modules

The concepts of modules and their configuration is described in the concepts section.

Bindings

Bindings provide specific configurations per module and station and even stream. Read the bindings section in concepts for more details on bindings.

Extensions

Extensions add new configuration options to modules. It does not matter how those extensions are used. Commonly a module loads a plugin, which requires additional configuration parameters - these are provided by an extension.

There are currently extensions for the following modules, corresponding to the plugins shown:

Module	Plugin’s
seedlink	caps mseedfifo q330 chain gdrt
global	NonLinLoc MLh Hypo71 Md MLr iLoc MN StdLoc LocExt GUI RecordStream FX-DFX mB_BB mb mb_IDC Ms_20 MLc MLv ML ML_IDC homogeneous LOCSAT FixedHypocenter
scm	text email ncurses
scevent	RegionCheck
kernel	messaging

See the documentation for each module for further information about its extensions.

Plugins

• NonLinLoc

  NonLinLoc locator wrapper plugin for SeisComP. NonLinLoc was written by Anthony Lomax (http://alomax.free.fr/nlloc).

• MLh

  The MLh plugin (previously MLsed) is designed to compute amplitudes and magnitudes according to the Swiss Seismological Service (SED) standards.

• Hypo71

  The traditional Hypo71PC locator with SeisComP.

• Md

  Duration magnitude plugin

• MLr

  The GNS/Geonet local magnitude

• iLoc

  Locator in SeisComP implemented by the plugin lociloc.

• MN

  Nuttli magnitude for Canada and other Cratonic regions

• StdLoc

  Generic locator plugin for SeisComP.

• LocExt

  Locator which forwards the processing to external scripts

• GUI

  The GUI configuration plugin extends the configuration of graphical user interfaces to various options to adjust the look and feel.

• RecordStream

  RecordStream interface for SeisComP.

• FX-DFX

  Implementation of the CTBTO/IDC polarization analysis for three-component stations.

• mB_BB

  Body wave magnitude at teleseismic distances similar to mb

• mb

  Body wave magnitude at teleseismic distances

• mb_IDC

  Body wave magnitude computed at CTBTO/IDC (mb) is calculated for seismic events from the time-defining primary body waves recorded at seismic stations at an epicentral distance between 20 and 105 degrees from the event.

• Ms_20

  Surface wave magnitude measured at around 20 s

• MLc

  Custom magnitude for local events measured on horizontal components

• MLv

  Local (Richter) magnitude measured on the vertical component

• ML

  Standard local (Richter) magnitude

• ML_IDC

  CTBTO/IDC local magnitude.

• homogeneous

  Travel-times for a homogeneous velocity model

• LOCSAT

  Locator in SeisComP for computing source time and hypocenter coordinates from phase picks.

• FixedHypocenter

  Locator for re-computing source time with fixed hypocenter

Module Configuration

agencyID

Default: GFZ

Type: string

Agency ID used to set creationInfo.agencyID in data model objects. Should not contain spaces.

datacenterID

Type: string

Datacenter ID which is primarily used by Arclink and its tools. Should not contain spaces.

organization

Default: Unset

Type: string

Organization name used mainly by ArcLink and SeedLink.

author

Default: @appname@@@@hostname@

Type: string

Author name used to set creationInfo.author in data model objects. @appname@ is replaced by the name of the respective executable, @hostname@ by the name of the computer on which it runs.

plugins

Type: list:string

List of plugins loaded at startup. Separate multiple names by comma. Add ${plugins} to consider all previously read values.

cityXML

Type: string

Path to the cities XML file. If undefined, the data is read from "@CONFIGDIR@/cities.xml" or "@DATADIR@/cities.xml". SeisComP ships with "@DATADIR@/cities.xml".

loadCities

Type: boolean

Load cities from file configured by the "cityXML" parameter. GUI and map applications enable loading of cities by default considering the parameter "scheme.map.showCities".

loadRegions

Type: boolean

Load custom FEP (Flinn-Engdahl polygon) regions from "@CONFIGDIR@/fep/" or @DATADIR@/fep/". GUI and map applications and scevent enable FEP regions by default. Explicitly uncheck the option to disregard by these applications.

publicIDPattern

Type: string

Define a custom pattern for generation of public object IDs. The following variables are resolved: @classname@ (class name of object), @id@ (public object count), @globalid@ (general object count), @time@ (current time, use ‘/’ to supply custom format e.g. @time/%FT%T.%fZ@

configModule

Default: trunk

Type: string

Name of the configuration module.

database

Type: string

Define the database connection. If no database is configured (which is the default) and a messaging connection is available, the application will receive the parameters after the connection is established. Override these values only if you know what you are doing.

The format is: service://user:pwd@host/database. "service" is the name of the database driver which can be queried with "--db-driver-list". IMPORTANT: This parameter replaces former "database.type" and "database.parameters" which have been removed.

recordstream

Type: string

SeisComP applications access waveform data through the RecordStream interface. Read the SeisComP documentation for a list of supported services and their configuration.

This parameter configures RecordStream source URL.

Format: [service://]location[#type]

"service": The name of the RecordStream implementation. If not given, "file://" is implied.

IMPORTANT: This parameter replaces former RecordStream configurations in "recordstream.service" and "recordstream.source" which have been removed.

logging.level

Default: 2

Type: int

Set the logging level between 1 and 4 where 1=ERROR, 2=WARNING, 3=INFO and 4=DEBUG.

logging.syslog

Default: false

Type: boolean

Enable logging to syslog if supported by the host system.

logging.components

Type: list:string

Limit the logging to the specified list of components. Example: ‘Application, Server’.

logging.component

Type: boolean

For each log entry print the component right after the log level. By default, the component output is enabled for file output but disabled for console output.

logging.context

Default: false

Type: boolean

For each log entry print the source file name and line number.

logging.utc

Type: boolean

Use UTC instead of local time in logging timestamps.

logging.file.rotator

Default: true

Type: boolean

Enable rotation of log files.

logging.file.rotator.timeSpan

Default: 86400

Type: int

Unit: s

Time span after which a log file is rotated.

logging.file.rotator.archiveSize

Default: 7

Type: int

How many historic log files to keep.

logging.file.rotator.maxFileSize

Default: 104857600

Type: int

Unit: byte

The maximum size of a log file in byte. The default value is 100 megabyte. If a log file exceeds that size, then it is rotated. To disable the size limit give 0 or a negative value.

logging.objects.timeSpan

Default: 60

Type: int

Unit: s

Time span for counting input/output of objects.

logging.syslog.facility

Default: local0

Type: string

Define the syslog facility to be used according to the defined facility names in syslog.h. The default is local0. If the given name is invalid or not available, initializing logging will fail and the application quits.

connection.server

Default: localhost

Type: host-with-port

Define the URL of the messaging server to connect to. URL format is [scheme://]host[:port][/queue]. Default scheme: scmp, default port: 18180, default queue: production. Examples:

All default: localhost

Specific host: scmp://10.0.1.4:18180/production

Specific host and SSL encryption: scmps://10.0.1.4:18180/production

connection.username

Type: string

Define the username to be used. The length is maybe limited by the messaging system used. By default, the module name (name of the executable) is used but sometimes it exceeds the 10 character limit and access is denied. To prevent errors set a different username. An empty username will let the system to generate one.

connection.certificate

Type: string

Define the OpenSSL client certificate to be used. Path to OpenSSL certificate in PKCS 12 format or the prefix "data:" followed by the Base64 encoded certificate data.

connection.timeout

Default: 3

Type: int

Unit: s

The connection timeout in seconds. 3 seconds are normally more than enough. If a client needs to connect to a remote system with a slow connection, a larger timeout might be needed.

connection.primaryGroup

Type: string

Define the primary group of a module. This is the name of the group where a module sends its messages to if the target group is not explicitly given in the send call.

connection.contentType

Default: binary

Type: string

Define the message encoding for sending. Allowed values are "binary", "json" or "xml". XML has more overhead in processing but is more robust when schema versions between client and server are different.

connection.subscriptions

Type: list:string

Define a list of message groups to subscribe to. The default is usually given by the application and does not need to be changed.

Note

database.* Define the database connection. If no database is configured (which is the default) and a messaging connection is available, the application will receive the parameters after the connection is established. Override these values only if you know what you are doing.

database.inventory

Type: string

Load the inventory database from a given XML file if set. This overrides the inventory definitions loaded from the database backend.

database.config

Type: string

Load the configuration database from a given XML file if set. This overrides the configuration definitions loaded from the database backend.

processing.whitelist.agencies

Type: list:string

Define a whitelist of agencies that are allowed for processing. Separate items by comma.

processing.blacklist.agencies

Type: list:string

Define a blacklist of agencies that are not allowed for processing. Separate items by comma.

inventory.whitelist.nettype

Type: list:string

List of network types to include when loading the inventory.

inventory.whitelist.statype

Type: list:string

List of station types to include when loading the inventory.

inventory.blacklist.nettype

Type: list:string

List of network types to exclude when loading the inventory.

inventory.blacklist.statype

Type: list:string

List of station types to exclude when loading the inventory.

scripts.crashHandler

Type: path

Path to crash handler script.

core.plugins

Default: dbmysql

Type: list:string

Define a list of core modules loaded at startup.

client.startStopMessage

Default: false

Type: boolean

Enable sending of an application start- and stop message to the STATUS_GROUP.

client.autoShutdown

Default: false

Type: boolean

Enable automatic application shutdown triggered by a status message.

client.shutdownMasterModule

Type: string

Trigger shutdown if the module name of the received messages match.

client.shutdownMasterUsername

Type: string

Trigger shutdown if the user name of the received messages match.

commands.target

Type: string

A regular expression of all clients that should handle a command message usually send to the GUI messaging group. Currently this flag is only used by GUI applications to set an artificial origin and to tell other clients to show this origin. To let all connected clients handle the command, ".*$" can be used.

Note

ttt.* Travel time table related configuration. Travel time tables can be added via plugins. Built-in interfaces are LOCSAT, libtau and homogeneous. For each loaded interface a list of supported models must be provided.

Note

ttt.$name.* $name is a placeholder for the name to be used.

ttt.$name.tables

Type: list:string

The list of supported model names per interface.

Note

amplitudes.* Parameters for amplitude measurements.

amplitudes.iaspei

Default: false

Type: boolean

Compute ML peak-to-trough and mb amplitudes according to IASPEI recommendations.

Note

amplitudes.ttt.* Travel time table specific parameters to be used for the computation of travel times referred to in signal and noise time window specifications, e.g. “signalBegin”. This can be overridden per station in its bindings.

amplitudes.ttt.interface

Default: libtau

Type: string

No description available

amplitudes.ttt.model

Default: iasp91

Type: string

No description available

Note

amplitudes.WoodAnderson.* Parameters of the Wood-Anderson seismometer response used for instrument simulation. The default values are according to Uhrhammer and Collins (1990) and were part of the IASPEI Magnitude Working Group recommendations of 2011 September 9.

amplitudes.WoodAnderson.gain

Default: 2080

Type: double

The gain of the Wood-Anderson response.

amplitudes.WoodAnderson.T0

Default: 0.8

Type: double

Unit: s

The eigenperiod of the Wood-Anderson seismometer.

amplitudes.WoodAnderson.h

Default: 0.7

Type: double

The damping constant of the Wood-Anderson seismometer.

Note

magnitudes.* Parameters for computing magnitudes. Add magnitude regionalization and mapping to Mw by magnitude-type profiles. One profile corresponds to one magnitude type.

magnitudes.aliases

Type: list:string

Definition of magnitude aliases for deriving new magnitude types from existing magnitude and amplitude types. Separate multiple entries by comma.

Format:

NewType:OriginalMagnitudeType[:OriginalAmplitudeType]

OriginalAmplitudeType is optional. The default amplitude type applies if OriginalAmplitudeType is undefined.

Examples for deriving magnitude of new type ABC from MLv:

ABC:MLv:MLv

ABC:MLv

Alias magnitudes can be configured like any other magnitude.

Note

magnitudes.$name.* Regionalization of magnitude configurations overriding global bindings. For parameters which are not set, the values defined in bindings apply. $name is a placeholder for the name to be used.

magnitudes.$name.MwMapping

Type: list:string

Mw magnitude mapping table for estimating Mw from network magnitude M. Mw values are given at some M.

Format: "M0:Mw0, M1:Mw1, …".

Between two values of M, Mw values will be linearly interpolated but not extrapolated.

magnitudes.$name.regionFile

Type: path

Path to a geofeature file, e.g. in BNA or GeoJSON format, with one or more polygons defining geographic regions. Each region allows further magnitude parametrization. The order of polygons/regions matters. The list is tested from front to back and the first hit wins. Magnitude-region profiles refer to the polygons by the name of the profile. The special name "world" must not be present in the geofeature file.

Note

magnitudes.$name.region.* Add magnitude region profiles for regions defined by polygons in the geofeature file of regionFile. Profile names must match one polygon name. Otherwise, the profile is not considered. The special name “world” corresponds to the region of the entire planet as a fallback.

Note

magnitudes.$name.region.$name.* $name is a placeholder for the name to be used.

magnitudes.$name.region.$name.enable

Default: false

Type: boolean

Enable the region or not.

magnitudes.$name.region.$name.minDist

Type: double

Unit: deg

The minimum distance required to compute a magnitude. This settings has no effect with e.g. scautopick as there is no information about the source of the event to compute the distance. The default value is implementation specific.

magnitudes.$name.region.$name.maxDist

Type: double

Unit: deg

The maximum distance allowed to compute a magnitude. This settings has no effect with e.g. scautopick as there is no information about the source of the event to compute the distance. The default value is implementation specific.

magnitudes.$name.region.$name.minDepth

Type: double

Unit: km

The minimum depth required to compute a magnitude. This settings has no effect with e.g. scautopick as there is no information about the source of the event to retrieve the depth. The default value is implementation specific.

magnitudes.$name.region.$name.maxDepth

Type: double

Unit: km

The maximum depth allowed to compute a magnitude. This settings has no effect with e.g. scautopick as there is no information about the source of the event to retrieve the depth. The default value is implementation specific.

magnitudes.$name.region.$name.check

Default: source

Type: string

Define how the region check is performed to accept a source receiver pair for further processing. Allowed values are:

source: Only the source/origin must be within the region.

source-receiver: Both source/origin and receiver/station must be within the region.

raypath: The entire path between source/origin and receiver/station must be withing the region.

magnitudes.$name.region.$name.multiplier

Type: double

Linear part of the default station correction for this region.

magnitudes.$name.region.$name.offset

Type: double

Constant part of the default station correction for this region.

NonLinLoc extension

NonLinLoc locator wrapper plugin for SeisComP. NonLinLoc was written by Anthony Lomax (http://alomax.free.fr/nlloc).

NonLinLoc.publicID

Default: NLL.@time/%Y%m%d%H%M%S.%f@.@id@

Type: string

PublicID creation pattern for an origin created by NonLinLoc.

NonLinLoc.outputPath

Default: /tmp/sc3.nll

Type: path

Defines the output path for all native NonLinLoc input and output files.

NonLinLoc.saveInput

Default: true

Type: boolean

Save input files *.obs in outputPath for later processing. Setting to false reduces file i/o and saves disk space.

NonLinLoc.saveIntermediateOutput

Default: true

Type: boolean

Save output files in outputPath for later processing or for viewing by the Seismicity Viewer. Setting to false reduces file i/o and saves disk space.

NonLinLoc.controlFile

Type: path

The default NonLinLoc control file to use.

NonLinLoc.defaultPickError

Default: 0.5

Type: double

Unit: s

The default pick error in seconds passed to NonLinLoc if a SeisComP pick object does not provide pick time uncertainties.

NonLinLoc.fixedDepthGridSpacing

Default: 0.1

Type: double

Unit: km

Since NLL does not support fixing the depth natively so this feature is emulated by settings the Z grid very tight around the depth to be fixed. This value sets the Z grid spacing.

NonLinLoc.allowMissingStations

Default: true

Type: boolean

Picks from stations with missing configuration will be ignored. The origin will be relocated without that pick if possible.

If set to false, the plug-in throws an excepection without locating.

NonLinLoc.profiles

Type: list:string

Defines a list of active profiles to be used by the plugin.

Note

NonLinLoc.profile.$name.* Defines a regional profile that is used if a prelocation falls inside the configured region. $name is a placeholder for the name to be used and needs to be added to NonLinLoc.profiles to become active.

NonLinLoc.profiles = a,b
NonLinLoc.profile.a.value1 = ...
NonLinLoc.profile.b.value1 = ...
# c is not active because it has not been added
# to the list of NonLinLoc.profiles
NonLinLoc.profile.c.value1 = ...

NonLinLoc.profile.$name.earthModelID

Type: string

earthModelID that is stored in the created origin.

NonLinLoc.profile.$name.methodID

Default: NonLinLoc

Type: string

methodID that is stored in the created origin.

NonLinLoc.profile.$name.tablePath

Type: path

Path to travel time tables (grids).

NonLinLoc.profile.$name.stationNameFormat

Default: @STA@

Type: string

Format of the station name used to select the right travel time table (grid) file for a station. By default only the station code is used (e.g. tablePath.P.@STA@.time.*), but that doesn’t allow to distinguish between multiple network codes or location codes that use the same station code. To overcome this limitation this parameter could be set in a more general way, for example @NET@_@STA@_@LOC@. In this way NonLinLoc will look for travel time table (grid) files of the form: tablePath.P.@NET@_@STA@_@LOC@.time.* Where @NET@ @STA@ @LOC@ are just placeholder for the actual codes

NonLinLoc.profile.$name.controlFile

Type: path

Control file of the current profile. If not set, the default control file will be used instead.

NonLinLoc.profile.$name.transform

Default: GLOBAL

Type: string

Transformation type of the configured region. Supported are SIMPLE and GLOBAL.

Default: GLOBAL is assumed.

NonLinLoc.profile.$name.region

Type: list:double

Defines the 4 corner values of the epicentral region for selecting the profile. The original epicentre must be within the region.

If transform is GLOBAL: min_lat, min_lon, max_lat, max_lon. The values define the geographic corner coordinates. Unit is degree.

If transform is SIMPLE: xmin, ymin, xmax, ymax. The values define the region relative to the configured origin. Unit is km.

NonLinLoc.profile.$name.origin

Type: list:double

Unit: deg

Only used for transformation SIMPLE. Expects 2 values: latitude, longitude. The value define the geographic origin of the area spanned by region. Unit is degree.

NonLinLoc.profile.$name.rotation

Type: double

Unit: deg

Only used for transformation SIMPLE. Defines the rotation around the origin of the defined region.

Hypo71 extension

The traditional Hypo71PC locator with SeisComP.

Note

hypo71.* Locator parameters: Hypo71

hypo71.logFile

Default: @LOGDIR@/HYPO71.LOG

Type: string

Temporary file used by Hypo71 to store calculation logs.

hypo71.inputFile

Default: @DATADIR@/hypo71/HYPO71.INP

Type: string

Temporary file to write Hypo71 input data to.

hypo71.outputFile

Default: @DATADIR@/hypo71/HYPO71.PRT

Type: string

Temporary output file to read Hypo71 location data from.

hypo71.defaultControlFile

Default: @DATADIR@/hypo71/profiles/default.hypo71.conf

Type: string

Hypo71 default profile. If no custom profile is specified, this profile will be used by the plugin when proceeding to a localization.

hypo71.hypo71ScriptFile

Default: @DATADIR@/hypo71/run.sh

Type: string

Bash script executed when calling the Hypo71 locator plugin for locating the earthquake.

hypo71.profiles

Type: list:string

Hypo71 profile name. Multiples names may be set. They must be separated by comma. Each profile can have different velocity or parameters.

hypo71.publicID

Type: string

Custom patternID to use when generating origin publicID

hypo71.useHypo71PatternID

Type: boolean

Specifies if the given publicD should be used for generating origin publicID

Note

hypo71.profile.* Profiles containing the profile-specific velocity model and the Hypo71 parameters.

Note

hypo71.profile.$name.* $name is a placeholder for the name to be used and needs to be added to hypo71.profiles to become active.

hypo71.profiles = a,b
hypo71.profile.a.value1 = ...
hypo71.profile.b.value1 = ...
# c is not active because it has not been added
# to the list of hypo71.profiles
hypo71.profile.c.value1 = ...

hypo71.profile.$name.earthModelID

Type: string

Profile’s velocity model name.

hypo71.profile.$name.methodID

Default: Hypo71

Type: string

Profile’s method. It is generally the locator’s name (Hypo71).

hypo71.profile.$name.controlFile

Type: string

File containing the profile parameters.

hypo71.profile.$name.fixStartDepthOnly

Default: false

Type: boolean

If the depth is requested to be fixed (e.g. by ticking the option in scolv) the plugin performs only one location starting at specified depth but with free depth evaluation. This option defines whether it should really fix the depth (false) or use this fixed depth only as starting point (true).

iLoc extension

Locator in SeisComP implemented by the plugin lociloc.

Note

iLoc.* Locator parameters: iLoc

iLoc.auxDir

Default: @DATADIR@/iloc/iLocAuxDir

Type: string

iLoc directory for auxialiary files and directories. Some of them must be provided from the iLoc website. Read the documentation for their installation.

iLoc.profiles

Default: iasp91,ak135

Type: list:string

iLoc profile name. Multiples names may be set separated by comma. Each profile can have different velocity or parameters.

Note

iLoc.profile.* Profiles containing the specific locator parameters. For the global models, iasp91 and ak135, profiles are automatically considered with defaults. To adjust the profile parameters the corresponding profile must be created.

Note

iLoc.profile.$name.* $name is a placeholder for the name to be used and needs to be added to iLoc.profiles to become active.

iLoc.profiles = a,b
iLoc.profile.a.value1 = ...
iLoc.profile.b.value1 = ...
# c is not active because it has not been added
# to the list of iLoc.profiles
iLoc.profile.c.value1 = ...

iLoc.profile.$name.Verbose

Default: true

Type: boolean

iLoc.profile.$name.globalModel

Type: string

Name of globally applied velocity model into which RSTT or the local model is integrated. If unset, the name of the profile is considered instead.

iLoc.profile.$name.UseRSTT

Default: false

Type: boolean

Use regional seismic travel-time tables

iLoc.profile.$name.UseRSTTPnSn

Default: true

Type: boolean

Use regional seismic travel-time tables for Pn and Sn

iLoc.profile.$name.UseRSTTPgLg

Default: true

Type: boolean

Use regional seismic travel-time tables for Pg and Lg

iLoc.profile.$name.UseLocalTT

Default: false

Type: boolean

Use local velocity model if defined in LocalVmodel.

iLoc.profile.$name.LocalVmodel

Type: string

Full path to a file containing the local velocity model. Requires: UseLocalTT = true. Empty string or unset or UseLocalTT = false disables using a local model in this profile.

Example:

@DATADIR@/iloc/iLocAuxDir/localmodels/model.localmodel.dat.

iLoc.profile.$name.MaxLocalTTDelta

Default: 3

Type: float

Unit: deg

Maximum epicentral distance for applying the local velocity model.

iLoc.profile.$name.DoGridSearch

Default: true

Type: boolean

Perform neighbourhood algorithm

iLoc.profile.$name.NAsearchRadius

Default: 5

Type: float

Unit: deg

Neighbourhood Algorithm: Search radius around initial epicentre

iLoc.profile.$name.NAsearchDepth

Default: 300

Type: float

Unit: km

Neighbourhood Algorithm: Search radius around initial depth

iLoc.profile.$name.NAsearchOT

Default: 30

Type: float

Unit: s

Neighbourhood Algorithm: Search radius around initial origin time

iLoc.profile.$name.NAlpNorm

Default: 1

Type: float

Neighbourhood Algorithm: p-value for norm to compute misfit [1,2]

iLoc.profile.$name.NAiterMax

Default: 5

Type: integer

Neighbourhood Algorithm: Maximum number of iterations

iLoc.profile.$name.NAcells

Default: 25

Type: integer

Neighbourhood Algorithm: Number of cells to be resampled at each iteration

iLoc.profile.$name.NAinitialSample

Default: 1000

Type: integer

Neighbourhood Algorithm: Size of initial sample

iLoc.profile.$name.NAnextSample

Default: 100

Type: integer

Neighbourhood Algorithm: Size of subsequent samples

iLoc.profile.$name.MinDepthPhases

Default: 3

Type: integer

Depth resolution: Minimum number of depth phases for depdp

iLoc.profile.$name.MaxLocalDistDeg

Default: 0.2

Type: float

Unit: deg

Depth resolution: Maximum local distance

iLoc.profile.$name.MinLocalStations

Default: 1

Type: integer

Depth resolution: Minimum number of local defining stations

iLoc.profile.$name.MaxSPDistDeg

Default: 2.0

Type: float

Unit: deg

Depth resolution: Maximum distance for using S-P travel-time differences.

iLoc.profile.$name.MinSPpairs

Default: 3

Type: integer

Depth resolution: Minimum number of defining S-P phase pairs

iLoc.profile.$name.MinCorePhases

Default: 3

Type: integer

Depth resolution: Minimum number of defining core reflection phases

iLoc.profile.$name.MaxShallowDepthError

Default: 30.0

Type: float

Unit: km

Depth resolution: Maximum depth error for crustal free-depth

iLoc.profile.$name.MaxDeepDepthError

Default: 60.0

Type: float

Unit: km

Depth resolution: Maximum depth error for deep free-depth

iLoc.profile.$name.DoCorrelatedErrors

Default: true

Type: boolean

Linearized inversion: Account for correlated errors

iLoc.profile.$name.SigmaThreshold

Default: 6.0

Type: float

Unit: s

Linearized inversion: Used to exclude big residuals from solution

iLoc.profile.$name.AllowDamping

Default: true

Type: boolean

Linearized inversion: Allow damping of model vector

iLoc.profile.$name.MinIterations

Default: 4

Type: integer

Linearized inversion: Minimum number of iterations

iLoc.profile.$name.MaxIterations

Default: 20

Type: integer

Linearized inversion: Maximum number of iterations

iLoc.profile.$name.MinNdefPhases

Default: 4

Type: integer

Linearized inversion: Minimum number of defining phases

iLoc.profile.$name.DoNotRenamePhases

Default: false

Type: boolean

Linearized inversion: Do not rename phases. Deactivating allows to rename the phases automatically for this profile.

MN extension

Nuttli magnitude for Canada and other Cratonic regions

Note

amplitudes.MN.* Amplitude control parameters for MN (Nuttli magnitude).

amplitudes.MN.velocityModel

Default: iasp91

Type: string

The travel time table set compiled for LocSAT. The tables are located in "share/locsat/tables/[vmodel].*".

Note

magnitudes.MN.* Regionalization of MN (Nuttli magnitude).

magnitudes.MN.region

Default: @DATADIR@/magnitudes/MN/MN.bna

Type: path

The path to the BNA file which defines the valid region for the MN magnitude. Note that the entire path from source to receiver must lie entirely within the polygon(s).

magnitudes.MN.offsetMw

Type: double

The offset applied to the MN network magnitude to estimate Mw(MN). If not configured then no Mw estimation will be applied.

StdLoc extension

Generic locator plugin for SeisComP.

StdLoc.profiles

Type: list:string

Defines a list of profiles to make available to the plugin.

Note

StdLoc.profile.$name.* $name is a placeholder for the name to be used and needs to be added to StdLoc.profiles to become active.

StdLoc.profiles = a,b
StdLoc.profile.a.value1 = ...
StdLoc.profile.b.value1 = ...
# c is not active because it has not been added
# to the list of StdLoc.profiles
StdLoc.profile.c.value1 = ...

StdLoc.profile.$name.method

Default: GridSearch+LeastSquares

Type: string

The location method to use: LeastSquares, GridSearch, OctTree, GridSearch+LeastSquares or OctTree+LeastSquares.

StdLoc.profile.$name.tableType

Default: LOCSAT

Type: string

Travel time table format type.

StdLoc.profile.$name.tableModel

Default: iasp91

Type: string

The model to be used. The format depends on tableType.

StdLoc.profile.$name.PSTableOnly

Default: true

Type: boolean

If enabled the arrival travel time information are fetched using ‘P’ and ‘S’ tables only and the user selected phase type is not considered (e.g Pg, Sg, PmP, SmS, P1, S1, etc).

StdLoc.profile.$name.usePickUncertainties

Default: false

Type: boolean

Whether to use pick time uncertainties rather than a fixed time error. If true, then the uncertainties are retrieved from each individual picks and a weight associated accordingly to ‘pickUncertaintyClasses’ parameter.

StdLoc.profile.$name.pickUncertaintyClasses

Default: 0.000,0.025,0.050,0.100,0.200,0.400

Type: list:string

Unit: s

Define the pick time uncertainty classes from which the pick weight is computed. This parameter defines a list of uncertainty time intervals: the interval in which a pick time uncertainty falls defines the pick class e.g. a pick wich uncertainty of 0.150 falls in the 4th interval and the pick class is then 4. if pick uncertainties are absent, the lowest class will be used. The pick weight then is computed as: 1 / 2^(class-1)

StdLoc.profile.$name.confLevel

Default: 0.9

Type: double

Confidence level, between 0.5 and 1.0, used in computing the confidence ellipsoid.

StdLoc.profile.$name.enableConfidenceEllipsoid

Default: true

Type: boolean

Compute the confidence ellipsoid for the location. This is optional since if it is not required it can be disabled to save some computation.

Note

StdLoc.profile.$name.GridSearch.* Find the source location by evaluating the hypocenter probability of each grid cell and returning the maximum likelihood hypocenter. The source time is derived from the weighted average of arrival travel times. The solution can be further improved combining it with the Least Squares algorithm, which will then be run for each grid cell, using the cell centroid as initial location estimate. In this case only few big cells are required.

StdLoc.profile.$name.GridSearch.center

Default: auto,auto,5

Type: list:string

Latitude,longitude,depth[km].

StdLoc.profile.$name.GridSearch.autoLatLon

Default: true

Type: boolean

If enabled, the grid center latitude and longitude are automatically computed as the average of the arrival station locations. The center depth should still be provided.

StdLoc.profile.$name.GridSearch.size

Default: 20,20,5

Type: list:string

Unit: km

Grid X, Y, Z size in km

StdLoc.profile.$name.GridSearch.cellSize

Default: 2.5,2.5,5

Type: list:string

Unit: km

Cell X, Y, Z size in km

StdLoc.profile.$name.GridSearch.misfitType

Default: L1

Type: string

The type of misfit to use, from which the likelyhood function is derived: L1 or L2 norm. L1 is less sensitive to outliers and so more suitable with automatic picks, L2 is the preferred choice for manual picks.

StdLoc.profile.$name.GridSearch.travelTimeError

Default: 0.25

Type: double

Unit: s

Typical error in seconds for travel-time to one station. This value affects the uncertainty of the location. In OctTree it also influences the probability density computation: a too conservative value increases the number of iterations required by OctTree to converge to a high resolution solution.

Note

StdLoc.profile.$name.OctTree.* Find the source location and time via OctTree search. This method uses the parameters defined in GridSearch, but applies the OctTree search algorithm. The solution can be further improved combining OctTree with the Least Squares algorithm, which can use the OctTree solution as initial location estimate.

StdLoc.profile.$name.OctTree.maxIterations

Default: 50000

Type: int

Number of iterations after which the search stops. A zero or negative value disable this stopping mechanism.

StdLoc.profile.$name.OctTree.minCellSize

Default: 0.1

Type: double

Unit: km

Minimum cell size to be generate by the OctTree search to stop. A zero or negative value disable this stopping mechanism.

Note

StdLoc.profile.$name.LeastSquares.* Find the source location and time via iterative Least Square. However an initial location estatimate is required. if that is not available then this method should be combined with GridSearch or OctTree.

StdLoc.profile.$name.LeastSquares.iterations

Default: 20

Type: int

Number of iterations. Each iteration will use the location and time from the previous Least Square solution.

StdLoc.profile.$name.LeastSquares.dampingFactor

Default: 0

Type: double

Damping factor value to be used when solving the equation system. 0 menas no damping factor.

StdLoc.profile.$name.LeastSquares.solverType

Default: LSMR

Type: string

Algorithm to use: either LSMR or LSQR

LocExt extension

Locator which forwards the processing to external scripts

Note

ExternalLocator.* Locator parameters: ExternalLocator

ExternalLocator.profiles

Type: list:string

A list of profiles defined as tuples of name and path to a script separated by colon.

GUI extension

The GUI configuration plugin extends the configuration of graphical user interfaces to various options to adjust the look and feel.

Note

groups.* Configures the target messaging groups for various object types. These parameters should only be touched if you know what you are doing.

groups.pick

Default: PICK

Type: string

Defines the target messaging group for manual picks, e.g. made in scolv.

groups.amplitude

Default: AMPLITUDE

Type: string

Defines the target messaging group for amplitudes, e.g. computed in scolv.

groups.magnitude

Default: MAGNITUDE

Type: string

Defines the target messaging group for magnitudes. scolv does not use this group but sends magnitudes together with the origin to the origin group.

groups.location

Default: LOCATION

Type: string

Defines the target messaging group for origins created in e.g. scolv.

groups.focalMechanism

Default: FOCMECH

Type: string

Defines the target messaging group for focal mechanisms created in e.g. scolv.

groups.event

Default: EVENT

Type: string

Defines the target messaging group for events and event journal entries.

map.location

Default: @DATADIR@/maps/world%s.png

Type: string

Specified the location and the structure of the map tiles to be used. This path is composed of zero or more directives and must include at least one conversion specification which starts with is introduced by the character % followed by a conversion specifier. Valid specifiers are s (replaced by tile ID), l (tile level), c (tile column) and r (tile row). An example for using the OpenStreetMap file structure is /path/to/maps/%l/%c/%r.png.

map.format

Default: rectangular

Type: string

Projection of the map tiles. Supported formats are: rectangular and mercator.

map.cacheSize

Default: 0

Type: int

Unit: bytes

Cache size of the map tiles. If 0 is specified a default cache size of 32mb is used. The higher the cache size the better the performance in higher resolutions. A higher cache size causes less image loader calls but requires more client memory.

map.type

Type: string

Used to distinguish tile store implementations provided by plug-ins.

map.customLayers

Type: list:string

Allows to add custom layers that are included via plugins. This is a list of layer names. A plugin must implement the layer interface and register itself with the name used in this list. The order of layers is the default order. The custom layers are prepended to the maps defaults layers such as the grid and the cities.

map.layers

Type: string

Defines the order of all configured layers. This includes the standard layers (grid, cities) as well as custom layers. The name of the grid layer is "grid" and the name of the cities layer is "cities".

Note

map.layers.events.* Configuration options for the events layer that shows all events on the map that are loaded in the event list.

map.layers.events.visible

Default: false

Type: boolean

Show the events layer on maps. Currently only supported by scolv.

Note

map.layers.fep.* Configuration for the fep layer showing the polygons of FEP (FLinn-Engdahl-Polygon) files on maps if they exist in @DATADIR@/fep or @CONFIGDIR@/fep.

map.layers.fep.visible

Default: true

Type: boolean

Show the fep layer on maps.

map.layers.cities.topPopulatedPlaces

Default: -1

Type: int

Maximum number of cities to be rendered. If cityPopulationWeight is less or equal than 0 then all cities are rendered ordered by population count, highest first. To show the N most populated places in the visible map region, set "scheme.map.cityPopulationWeight" to 0 and set this parameter to N.

map.zoom.sensitivity

Default: 0.5

Type: double

Zoom sensitivity of the map

Note

scheme.* This group defines various options for color, pen, brush, font, etc. for SeisComP graphical user interfaces. There are various conventions to define colors, fonts and gradients. ** Colors are defined in HTML convention, e.g. as rgb values, hexadecimal numbers or color keyword names defined by W3C. If rgb or rgba is used, it must be quoted because the comma is handled as list separator by the configuration. Examples: “rgb(255,0,0)”, FF00FF40, green. ** Gradients are configured as lists of tuples where each tuple is colon separated in the form value:color. Value is either int or double and color is again a color definition. Example: 0:yellow,10:red

scheme.showMenu

Default: true

Type: boolean

Show menu bar.

scheme.showStatusBar

Default: true

Type: boolean

Show status bar.

scheme.tabPosition

Type: string

Set position if tab bar. An unset value lets the application decide where to place the tab bar. This option might not be supported by all applications. Valid positions are: off, north, south, east, west

scheme.map.stationSize

Default: 8

Type: int

Unit: px

The station symbol size (e.g. in scmv).

scheme.map.originSymbolMinSize

Default: 9

Type: int

Unit: px

The origin symbol minimum size. The formula to compute the size of the origin symbol is: 4.9*(M-1.2).

scheme.map.vectorLayerAntiAlias

Default: false

Type: boolean

Apply antialiasing to map layers. This improves the visual quality but decreases performance.

scheme.map.bilinearFilter

Default: true

Type: boolean

Apply bilinear filtering to maps. The bilinear filter improves the visual quality but decreases performance slightly. It is only used for static map images. Not while dragging.

scheme.map.showGrid

Default: true

Type: boolean

Display the latitude/longitude grid on maps

scheme.map.showCities

Default: true

Type: boolean

Show cities defined in "citiesXML" on maps

scheme.map.cityPopulationWeight

Default: 150

Type: int

Controls at which zoom level a city will be visible. The following formula is used: screen_width (km) * weight >= population

scheme.map.showLayers

Default: true

Type: boolean

Show custom layers on maps

scheme.map.showLegends

Default: false

Type: boolean

Show map legends initially. Some applications provide controls to toggle the visibility in addition to this option.

scheme.map.projection

Default: Rectangular

Type: string

SeisComP ships with the rectangular projection built-in. Other projections may be provided through plugins.

scheme.map.toBGR

Default: false

Type: boolean

Converts map colors from RGB color scheme to BGR.

scheme.map.polygonRoughness

Default: 3

Type: int

Unit: px

Minimum screen distance to plot a polygon or polyline line segment.

scheme.colors.background

Type: color

A general application background color. Can be used to give each application a different background color. An unset value lets Qt decide.

scheme.colors.agencies

Type: list:string-tuples

Sets desired colors for particular agencyIDs. It depends on the applications if they honor this setting or not. The event list will render the agencyID string with the defined colors. This is a list of tuples (AGENCY:COLOR), e.g. "GEOFON:black, USGS:blue".

scheme.colors.spectrogram

Type: gradient

The color gradient of the spectrogram amplitudes. The node values are not important as they will be projected onto the desired amplitude range.

scheme.colors.map.lines

Type: color

The color of lines in the map (e.g. lines connecting the origin and a station).

scheme.colors.map.outlines

Type: color

The color of station outlines in the map.

scheme.colors.map.stationAnnotations

Type: color

The color of station annotations.

scheme.colors.map.cityLabels

Type: color

The color of city labels.

scheme.colors.map.cityOutlines

Type: color

The color of city outlines.

scheme.colors.map.cityCapital

Type: color

The color of a capital.

scheme.colors.map.cityNormal

Type: color

The color of a "normal" city.

Note

scheme.colors.map.directivity.* Defines the pen of the directivity information (backazimuth and slowness) in the map.

scheme.colors.map.directivity.color

Default: FFA000

Type: color

The color of the pen.

scheme.colors.map.directivity.style

Default: DotLine

Type: string

The style of the pen. Supported values are: NoPen, SolidLine, DashLine, DotLine, DashDotLine, DashDotDotLine.

scheme.colors.map.directivity.width

Default: 1

Type: double

Unit: px

The width of the pen.

Note

scheme.colors.map.grid.* Defines the pen of the latitude/longitude grid of the map.

scheme.colors.map.grid.color

Default: FFFFFF

Type: color

The color of the pen.

scheme.colors.map.grid.style

Default: DotLine

Type: string

The style of the pen. Supported values are: NoPen, SolidLine, DashLine, DotLine, DashDotLine, DashDotDotLine.

scheme.colors.map.grid.width

Default: 1

Type: double

Unit: px

The width of the pen.

Note

scheme.colors.map.annotations.* Appearance of map annotations including a text color (pen), a border color (pen) and a background color (brush).

scheme.colors.map.annotations.textSize

Default: 9

Type: int

Unit: pt

Font point size of the label text.

Note

scheme.colors.map.annotations.normalText.* Text pen for non highlighted annotations.

scheme.colors.map.annotations.normalText.color

Default: c0c0c0

Type: color

The color of the pen.

scheme.colors.map.annotations.normalText.style

Default: SolidLine

Type: string

The style of the pen. Supported values are: NoPen, SolidLine, DashLine, DotLine, DashDotLine, DashDotDotLine.

scheme.colors.map.annotations.normalText.width

Default: 1

Type: double

Unit: px

The width of the pen.

Note

scheme.colors.map.annotations.normalBorder.* Border pen for non highlighted annotations.

scheme.colors.map.annotations.normalBorder.color

Default: a0a0a4

Type: color

The color of the pen.

scheme.colors.map.annotations.normalBorder.style

Default: SolidLine

Type: string

The style of the pen. Supported values are: NoPen, SolidLine, DashLine, DotLine, DashDotLine, DashDotDotLine.

scheme.colors.map.annotations.normalBorder.width

Default: 1

Type: double

Unit: px

The width of the pen.

Note

scheme.colors.map.annotations.normalBackground.* Background brush for non highlighted annotations.

scheme.colors.map.annotations.normalBackground.color

Default: 202020c0

Type: color

The color of the brush.

scheme.colors.map.annotations.normalBackground.style

Default: solid

Type: string

The style of the brush. Supported values are, e.g.: solid, dense1, dense7, horizontal, vertical, cross, bdiag, fdiag, diagcross.

Note

scheme.colors.map.annotations.highlightedText.* Text pen for highlighted annotations.

scheme.colors.map.annotations.highlightedText.color

Default: 000000

Type: color

The color of the pen.

scheme.colors.map.annotations.highlightedText.style

Default: SolidLine

Type: string

The style of the pen. Supported values are: NoPen, SolidLine, DashLine, DotLine, DashDotLine, DashDotDotLine.

scheme.colors.map.annotations.highlightedText.width

Default: 1

Type: double

Unit: px

The width of the pen.

Note

scheme.colors.map.annotations.highlightedBorder.* Border pen for highlighted annotations.

scheme.colors.map.annotations.highlightedBorder.color

Default: a0a0a4

Type: color

The color of the pen.

scheme.colors.map.annotations.highlightedBorder.style

Default: SolidLine

Type: string

The style of the pen. Supported values are: NoPen, SolidLine, DashLine, DotLine, DashDotLine, DashDotDotLine.

scheme.colors.map.annotations.highlightedBorder.width

Default: 1

Type: double

Unit: px

The width of the pen.

Note

scheme.colors.map.annotations.highlightedBackground.* Background brush for highlighted annotations.

scheme.colors.map.annotations.highlightedBackground.color

Default: ffffffa0

Type: color

The color of the brush.

scheme.colors.map.annotations.highlightedBackground.style

Default: solid

Type: string

The style of the brush. Supported values are, e.g.: solid, dense1, dense7, horizontal, vertical, cross, bdiag, fdiag, diagcross.

scheme.colors.records.foreground

Default: 808080

Type: color

The general color of records/traces.

scheme.colors.records.alternateForeground

Default: 808080

Type: color

A general trace color of the alternate trace (eg scheli).

scheme.colors.records.background

Type: color

The general background color of records/traces.

scheme.colors.records.alternateBackground

Type: color

A general background color of the alternate trace.

scheme.colors.records.spectrogram

Default: 000000

Type: color

The trace color used on top of a spectrogram.

scheme.colors.records.gaps

Default: FFFF0040

Type: color

The color of data gaps in trace views.

scheme.colors.records.overlaps

Default: FF00FF40

Type: color

The color of data overlaps in trace views.

scheme.colors.records.alignment

Default: FF0000

Type: color

The color of the alignment marker in trace views.

Note

scheme.colors.records.borders.* Properties of record borders

Note

scheme.colors.records.borders.standard.* Standard properties

Note

scheme.colors.records.borders.standard.pen.* Defines the pen of the border line.

scheme.colors.records.borders.standard.pen.color

Type: color

The color of the pen.

scheme.colors.records.borders.standard.pen.style

Type: string

The style of the pen. Supported values are: NoPen, SolidLine, DashLine, DotLine, DashDotLine, DashDotDotLine.

scheme.colors.records.borders.standard.pen.width

Type: double

Unit: px

The width of the pen.

Note

scheme.colors.records.borders.standard.brush.* Defines the brush of the enlcosed area.

scheme.colors.records.borders.standard.brush.color

Type: color

The color of the pen.

scheme.colors.records.borders.standard.brush.style

Type: string

The style of the brush. Supported values are, e.g.: solid, dense1, dense7, horizontal, vertical, cross, bdiag, fdiag, diagcross.

Note

scheme.colors.records.borders.signatureValid.* Properties for records with valid signatures

Note

scheme.colors.records.borders.signatureValid.pen.* Defines the pen of the border line.

scheme.colors.records.borders.signatureValid.pen.color

Type: color

The color of the pen.

scheme.colors.records.borders.signatureValid.pen.style

Type: string

The style of the pen. Supported values are: NoPen, SolidLine, DashLine, DotLine, DashDotLine, DashDotDotLine.

scheme.colors.records.borders.signatureValid.pen.width

Type: double

Unit: px

The width of the pen.

Note

scheme.colors.records.borders.signatureValid.brush.* Defines the brush of the enlcosed area.

scheme.colors.records.borders.signatureValid.brush.color

Type: color

The color of the pen.

scheme.colors.records.borders.signatureValid.brush.style

Type: string

The style of the pen. Supported values are, e.g.: solid, dense1, dense7, horizontal, vertical, cross, bdiag, fdiag, diagcross.

Note

scheme.colors.records.borders.signatureInvalid.* Properties for records with invalid signatures

Note

scheme.colors.records.borders.signatureInvalid.pen.* Defines the pen of the border line.

scheme.colors.records.borders.signatureInvalid.pen.color

Type: color

The color of the pen.

scheme.colors.records.borders.signatureInvalid.pen.style

Type: string

The style of the pen. Supported values are: NoPen, SolidLine, DashLine, DotLine, DashDotLine, DashDotDotLine.

scheme.colors.records.borders.signatureInvalid.pen.width

Type: double

Unit: px

The width of the pen.

Note

scheme.colors.records.borders.signatureInvalid.brush.* Defines the brush of the enlcosed area.

scheme.colors.records.borders.signatureInvalid.brush.color

Type: color

The color of the pen.

scheme.colors.records.borders.signatureInvalid.brush.style

Type: string

The style of the pen. Supported values are, e.g.: solid, dense1, dense7, horizontal, vertical, cross, bdiag, fdiag, diagcross.

Note

scheme.colors.records.offset.* Defines the pen of the record offset line.

scheme.colors.records.offset.color

Default: C0C0FF

Type: color

The color of the pen.

scheme.colors.records.offset.style

Default: SolidLine

Type: string

The style of the pen. Supported values are: NoPen, SolidLine, DashLine, DotLine, DashDotLine, DashDotDotLine.

scheme.colors.records.offset.width

Default: 0.0

Type: double

Unit: px

The width of the pen.

Note

scheme.colors.records.gridPen.* Defines the pen of the record grid.

scheme.colors.records.gridPen.color

Default: 00000020

Type: color

The color of the pen.

scheme.colors.records.gridPen.style

Default: DashLine

Type: string

The style of the pen. Supported values are: NoPen, SolidLine, DashLine, DotLine, DashDotLine, DashDotDotLine.

scheme.colors.records.gridPen.width

Default: 1.0

Type: double

Unit: px

The width of the pen.

Note

scheme.colors.records.subGridPen.* Defines the pen of the secondary record grid.

scheme.colors.records.subGridPen.color

Default: 00000000

Type: color

The color of the pen.

scheme.colors.records.subGridPen.style

Default: DotLine

Type: string

The style of the pen. Supported values are: NoPen, SolidLine, DashLine, DotLine, DashDotLine, DashDotDotLine.

scheme.colors.records.subGridPen.width

Default: 1.0

Type: double

Unit: px

The width of the pen.

Note

scheme.colors.records.states.* Defines the background color of records depending on their state.

scheme.colors.records.states.unrequested

Default: 00000080

Type: color

Additional data which was not requested.

scheme.colors.records.states.requested

Default: ffff0080

Type: color

Requested data Background color of requested data.

scheme.colors.records.states.inProgress

Default: 00ff0010

Type: color

Data currently loading.

scheme.colors.records.states.notAvailable

Default: ff000080

Type: color

Data which was requested but is not available.

scheme.colors.picks.manual

Default: 00FF00

Type: color

The color of manual picks.

scheme.colors.picks.automatic

Default: FF0000

Type: color

The color of automatic picks.

scheme.colors.picks.undefined

Default: A0A0A4

Type: color

The color of picks with undefined state.

scheme.colors.picks.disabled

Default: A0A0A4

Type: color

The color of disabled picks.

scheme.colors.arrivals.manual

Default: 00A000

Type: color

The color of manual arrivals (arrivals that bind manual picks, e.g. residual plot of scolv, manual picker, …)

scheme.colors.arrivals.automatic

Default: A00000

Type: color

The color of automatic arrivals,

scheme.colors.arrivals.theoretical

Default: 0000A0

Type: color

The color of theoretical arrivals.

scheme.colors.arrivals.undefined

Default: A00000

Type: color

The color of arrivals binding picks with undefined state.

scheme.colors.arrivals.disabled

Default: A0A0A4

Type: color

The color of disabled arrivals.

scheme.colors.arrivals.residuals

Type: gradient

The gradient of arrivals residuals. A gradient is defined as a list of tuples separated by colon where the first item is the value and the second is the color. Colors can be given in rgb notation or hexadecimal. When rgb is used double quotes are needed to protect the comma inside the rgb definition, e.g. -8:"rgb(0,0,100)", -4:"rgb(0,0,255)", -3:"rgb(100,100,255)", …

scheme.colors.magnitudes.set

Default: 00A000

Type: color

The color of active magnitudes.

scheme.colors.magnitudes.unset

Default: 000000

Type: color

The color of inactive magnitudes.

scheme.colors.magnitudes.disabled

Default: A0A0A4

Type: color

The color of disabled magnitudes.

scheme.colors.magnitudes.residuals

Type: gradient

The gradient of magnitude residuals.

scheme.colors.stations.text

Default: ffffff

Type: color

The color of the station name.

scheme.colors.stations.associated

Default: 82AD58

Type: color

The color of associated stations (e.g. in scmv).

scheme.colors.stations.triggering

Type: color

The color of triggered stations.

scheme.colors.stations.triggered0

Type: color

No description available

scheme.colors.stations.triggered1

Type: color

No description available

scheme.colors.stations.triggered2

Type: color

No description available

scheme.colors.stations.disabled

Type: color

The color of disabled stations.

scheme.colors.stations.idle

Type: color

The color of idle stations.

Note

scheme.colors.qc.* The color of QC.delay thresholds in scmv.

scheme.colors.qc.delay0

Default: 00ffff

Type: color

No description available

scheme.colors.qc.delay1

Default: 00ff00

Type: color

No description available

scheme.colors.qc.delay2

Default: fffd00

Type: color

No description available

scheme.colors.qc.delay3

Default: ff6633

Type: color

No description available

scheme.colors.qc.delay4

Default: ff0000

Type: color

No description available

scheme.colors.qc.delay5

Default: cccccc

Type: color

No description available

scheme.colors.qc.delay6

Default: 999999

Type: color

No description available

scheme.colors.qc.delay7

Default: 666666

Type: color

No description available

scheme.colors.qc.qcWarning

Default: ffff00

Type: color

No description available

scheme.colors.qc.qcError

Default: ff0000

Type: color

No description available

scheme.colors.qc.qcOk

Default: 00ff00

Type: color

No description available

scheme.colors.qc.qcNotSet

Default: 000000

Type: color

No description available

Note

scheme.colors.gm.* The color of ground motion amplitudes in scmv.

scheme.colors.gm.gm0

Type: color

No description available

scheme.colors.gm.gm1

Type: color

No description available

scheme.colors.gm.gm2

Type: color

No description available

scheme.colors.gm.gm3

Type: color

No description available

scheme.colors.gm.gm4

Type: color

No description available

scheme.colors.gm.gm5

Type: color

No description available

scheme.colors.gm.gm6

Type: color

No description available

scheme.colors.gm.gm7

Type: color

No description available

scheme.colors.gm.gm8

Type: color

No description available

scheme.colors.gm.gm9

Type: color

No description available

scheme.colors.gm.gmNotSet

Type: color

No description available

scheme.colors.recordView.selectedTraceZoom

Default: C0C0FFC0

Type: color

The color of the selected zoom area (e.g. manual picker).

scheme.colors.legend.background

Type: color

The map legend background color.

scheme.colors.legend.border

Type: color

The map legend border color.

scheme.colors.legend.text

Type: color

The map legend text color.

scheme.colors.legend.headerText

Type: color

The map legend header color.

scheme.colors.originSymbol.classic

Default: false

Type: boolean

No description available

scheme.colors.originSymbol.depth.gradient

Default: 0:FF0000,50:ffA500,100:FFFF00,250:00FF00,600:0000FF

Type: gradient

The depth gradient.

scheme.colors.originSymbol.depth.discrete

Default: true

Type: boolean

Setting this parameter to true will not interpolate between the depth steps and the color for a depth <= input is used.

Note

scheme.colors.originStatus.* The origin status colors (e.g. in event list).

scheme.colors.originStatus.automatic

Type: color

No description available

scheme.colors.originStatus.manual

Type: color

No description available

Note

scheme.colors.splash.* Defines colors used in the splash screen shown at application startup.

scheme.colors.splash.message

Default: 808080

Type: color

Text color of the message string.

scheme.colors.splash.version

Default: 02589e

Type: color

Text color of the version string.

scheme.marker.lineWidth

Type: int

Unit: px

The line width of the marker (e.g. picks of manual picker).

scheme.records.lineWidth

Default: 1

Type: int

Unit: px

The line width of the records / traces.

scheme.records.antiAliasing

Default: true

Type: boolean

Configures antialiasing of records / traces. Antialiasing needs more two times to storage space as non antialiasing but it improves visual quality.

scheme.records.optimize

Default: true

Type: boolean

Configures optimization of trace polylines. If activated then lines on the same pixel line or same pixel row collapse into single lines.

scheme.records.borders.drawMode

Default: box

Type: string

Mode for drawing record borders as box or line on top or bottom.

Supported values: "topline","box","bottomline"

Note

scheme.fonts.base.* The general base font of an application. This overrides the default Qt application font.

scheme.fonts.base.family

Type: string

Sets the family name of the font. The name is case insensitive and may include a foundry name.

scheme.fonts.base.size

Type: int

Defines the point size of the font

scheme.fonts.base.bold

Default: false

Type: boolean

No description available

scheme.fonts.base.italic

Default: false

Type: boolean

No description available

scheme.fonts.base.underline

Default: false

Type: boolean

No description available

scheme.fonts.base.overline

Default: false

Type: boolean

No description available

Note

scheme.fonts.small.* The smallest available font. If undefined the point size is 2 points smaller than the base font.

scheme.fonts.small.family

Type: string

Sets the family name of the font. The name is case insensitive and may include a foundry name.

scheme.fonts.small.size

Type: int

Defines the point size of the font

scheme.fonts.small.bold

Default: false

Type: boolean

No description available

scheme.fonts.small.italic

Default: false

Type: boolean

No description available

scheme.fonts.small.underline

Default: false

Type: boolean

No description available

scheme.fonts.small.overline

Default: false

Type: boolean

No description available

Note

scheme.fonts.normal.* The default text font. If undefined the point size is 2 points larger than the base font.

scheme.fonts.normal.family

Type: string

Sets the family name of the font. The name is case insensitive and may include a foundry name.

scheme.fonts.normal.size

Type: int

Defines the point size of the font

scheme.fonts.normal.bold

Default: false

Type: boolean

No description available

scheme.fonts.normal.italic

Default: false

Type: boolean

No description available

scheme.fonts.normal.underline

Default: false

Type: boolean

No description available

scheme.fonts.normal.overline

Default: false

Type: boolean

No description available

Note

scheme.fonts.large.* The largest text font. If undefined the point size is 6 points larger than the base font.

scheme.fonts.large.family

Type: string

Sets the family name of the font. The name is case insensitive and may include a foundry name.

scheme.fonts.large.size

Type: int

Defines the point size of the font

scheme.fonts.large.bold

Default: false

Type: boolean

No description available

scheme.fonts.large.italic

Default: false

Type: boolean

No description available

scheme.fonts.large.underline

Default: false

Type: boolean

No description available

scheme.fonts.large.overline

Default: false

Type: boolean

No description available

Note

scheme.fonts.highlight.* Font used to highlight text. If undefined it equals the normal font except for a bold font face.

scheme.fonts.highlight.family

Type: string

Sets the family name of the font. The name is case insensitive and may include a foundry name.

scheme.fonts.highlight.size

Type: int

Defines the point size of the font

scheme.fonts.highlight.bold

Default: false

Type: boolean

No description available

scheme.fonts.highlight.italic

Default: false

Type: boolean

No description available

scheme.fonts.highlight.underline

Default: false

Type: boolean

No description available

scheme.fonts.highlight.overline

Default: false

Type: boolean

No description available

Note

scheme.fonts.heading1.* The largest heading font. If undefined it uses a bold font face and a font size twice as large as the normal font.

scheme.fonts.heading1.family

Type: string

Sets the family name of the font. The name is case insensitive and may include a foundry name.

scheme.fonts.heading1.size

Type: int

Defines the point size of the font

scheme.fonts.heading1.bold

Default: false

Type: boolean

No description available

scheme.fonts.heading1.italic

Default: false

Type: boolean

No description available

scheme.fonts.heading1.underline

Default: false

Type: boolean

No description available

scheme.fonts.heading1.overline

Default: false

Type: boolean

No description available

Note

scheme.fonts.heading2.* The second largest heading font. If undefined it uses a bold font face and a font size twice as large as the base font.

scheme.fonts.heading2.family

Type: string

Sets the family name of the font. The name is case insensitive and may include a foundry name.

scheme.fonts.heading2.size

Type: int

Defines the point size of the font

scheme.fonts.heading2.bold

Default: false

Type: boolean

No description available

scheme.fonts.heading2.italic

Default: false

Type: boolean

No description available

scheme.fonts.heading2.underline

Default: false

Type: boolean

No description available

scheme.fonts.heading2.overline

Default: false

Type: boolean

No description available

Note

scheme.fonts.heading3.* The smallest heading font. If undefined it uses a bold font face and a font size 4 points larger than the base font.

scheme.fonts.heading3.family

Type: string

Sets the family name of the font. The name is case insensitive and may include a foundry name.

scheme.fonts.heading3.size

Type: int

Defines the point size of the font

scheme.fonts.heading3.bold

Default: false

Type: boolean

No description available

scheme.fonts.heading3.italic

Default: false

Type: boolean

No description available

scheme.fonts.heading3.underline

Default: false

Type: boolean

No description available

scheme.fonts.heading3.overline

Default: false

Type: boolean

No description available

Note

scheme.fonts.cityLabels.* Font used for city labels. If undefined it equals the base font.

scheme.fonts.cityLabels.family

Type: string

Sets the family name of the font. The name is case insensitive and may include a foundry name.

scheme.fonts.cityLabels.size

Type: int

Defines the point size of the font

scheme.fonts.cityLabels.bold

Default: false

Type: boolean

No description available

scheme.fonts.cityLabels.italic

Default: false

Type: boolean

No description available

scheme.fonts.cityLabels.underline

Default: false

Type: boolean

No description available

scheme.fonts.cityLabels.overline

Default: false

Type: boolean

No description available

Note

scheme.fonts.splashVersion.* Font used for version string in the splash dialog shown at application startup. If undefined it equals the base font with a bold font face and a font size of 12.

scheme.fonts.splashVersion.family

Type: string

Sets the family name of the font. The name is case insensitive and may include a foundry name.

scheme.fonts.splashVersion.size

Type: int

Defines the point size of the font

scheme.fonts.splashVersion.bold

Default: false

Type: boolean

No description available

scheme.fonts.splashVersion.italic

Default: false

Type: boolean

No description available

scheme.fonts.splashVersion.underline

Default: false

Type: boolean

No description available

scheme.fonts.splashVersion.overline

Default: false

Type: boolean

No description available

Note

scheme.fonts.splashMessage.* Font used for the message text in the splash dialog shown at application startup. If undefined it equals the base font with a font size of 12.

scheme.fonts.splashMessage.family

Type: string

Sets the family name of the font. The name is case insensitive and may include a foundry name.

scheme.fonts.splashMessage.size

Type: int

Defines the point size of the font.

scheme.fonts.splashMessage.bold

Default: false

Type: boolean

No description available

scheme.fonts.splashMessage.italic

Default: false

Type: boolean

No description available

scheme.fonts.splashMessage.underline

Default: false

Type: boolean

No description available

scheme.fonts.splashMessage.overline

Default: false

Type: boolean

No description available

scheme.precision.depth

Default: 0

Type: int

The precision of depth values.

scheme.precision.distance

Default: 1

Type: int

The precision of distance values. This parameter only applies if scheme.unit.distanceInKM = true.

scheme.precision.location

Default: 2

Type: int

The precision of lat/lon values.

scheme.precision.magnitude

Default: 1

Type: int

The precision of magnitude values.

scheme.precision.originTime

Default: 0

Type: int

The precision of origin times.

scheme.precision.pickTime

Default: 1

Type: int

The precision of pick times.

scheme.precision.traceValues

Default: 1

Type: int

Precision of displayed offset/amp in all trace widgets.

scheme.precision.rms

Default: 1

Type: int

Precision of RMS values.

scheme.precision.uncertainties

Default: 0

Type: int

Precision of uncertainty values, e.g. latitude errors.

scheme.unit.distanceInKM

Default: false

Type: boolean

Display distances in km?

scheme.dateTime.useLocalTime

Default: false

Type: boolean

Display times in localtime or UTC (default).

Note

scheme.splash.* Defines the appearance of the splash screen shown at application startup.

Note

scheme.splash.message.* Position of the message text.

scheme.splash.message.align

Default: 44

Type: int

Qt::Alignment bit mask. Default: AlignHCenter | AlignBottom

Note

scheme.splash.message.pos.* Position in screen coordinates.

scheme.splash.message.pos.x

Default: 200

Type: int

Unit: px

Horizontal position.

scheme.splash.message.pos.y

Default: 260

Type: int

Unit: px

Vertical position.

Note

scheme.splash.version.* Position of the version string

scheme.splash.version.align

Default: 34

Type: int

Qt::Alignment bit mask. Default: AlignRight | AlignBottom

Note

scheme.splash.version.pos.* Position in screen coordinates.

scheme.splash.version.pos.x

Default: 362

Type: int

Unit: px

Horizontal position.

scheme.splash.version.pos.y

Default: 190

Type: int

Unit: px

Vertical position.

Note

events.timeAgo.* Defines maximum age of events to load. The value of all parameters are aggregated.

events.timeAgo.days

Default: 1

Type: int

Unit: d

Age in days.

events.timeAgo.hours

Default: 0

Type: int

Unit: h

Age in hours.

events.timeAgo.minutes

Default: 0

Type: int

Unit: m

Age in minutes.

events.timeAgo.seconds

Default: 0

Type: int

Unit: s

Age in seconds.

Note

mode.* Configuration of special applications modes.

mode.interactive

Default: true

Type: boolean

Defines if application interaction is allowed.

mode.fullscreen

Default: false

Type: boolean

Defines if the application should be launched in fullscreen mode hiding title bar, main menu and status bar.

picker.filters

Default: "BP 0.1 - 1 Hz  3rd order;RMHP(10)>>ITAPER(30)>>BW(3,0.1,1)",      "BP 0.1 - 2 Hz  3rd order;RMHP(10)>>ITAPER(30)>>BW(3,0.1,2)",      "BP 1 - 3 Hz  3rd order;RMHP(10)>>ITAPER(30)>>BW(3,1.0,3)",      "BP 0.4 - 1 Hz  3rd order;RMHP(10)>>ITAPER(30)>>BW(3,0.4,1)",      "@BP 0.7 - 2 Hz  3rd order;RMHP(10)>>ITAPER(30)>>BW(3,0.7,2)",      "BP 2 - 4 Hz  3rd order;RMHP(5)>>ITAPER(10)>>BW(3,2.0,4)",      "BP 3 - 6 Hz  3rd order;RMHP(5)>>ITAPER(10)>>BW(3,3.0,6)",      "BP 4 - 8 Hz  3rd order;RMHP(5)>>ITAPER(10)>>BW(3,4.0,8)",      "BP 1 - 5 Hz  3rd order;RMHP(5)>>ITAPER(10)>>BW(3,1.0,5)",      "HP 3 Hz  3rd order;RMHP(1)>>ITAPER(2)>>BW_HP(3,3)",      "BP 0.7 - 2 Hz + STA/LTA(1,50);RMHP(10)->ITAPER(30)->BW(3,0.7,2)->STALTA(1,50)"

Type: list:string

Configures the default filters selectable in manual picker. The entry with a leading "@" is selected as default filter.

Note

eventlist.* Control the Events tab, e.g. in scolv, showing the list of loaded events.

eventlist.visibleColumns

Default: M,MType,Phases,RMS,Lat,Lon,Depth,Stat,Agency,Region,ID

Type: list:string

Configure the columns of the event list that are visible initially. The first column containing the origin time is always visible and cannot be hidden. Possible values are:

Certainty, Type, M, MType, RMS, AzGap, Phases, Lat, Lon, Depth, DType, Stat, FM, Origins, Agency, Author, Region, ID.

Custom columns can be added by eventlist.customColumn.* or eventlist.scripts.* parameters.

Note

eventlist.customColumn.* Custom column showing origin or event comments.

eventlist.customColumn.name

Type: string

Name of the custom column to be shown in the column header.

eventlist.customColumn.originCommentID

Type: string

ID of the origin comment to look up.

eventlist.customColumn.eventCommentID

Type: string

ID of the event comment to look up.

originCommentID, if configured, takes priority.

eventlist.customColumn.pos

Default: -1

Type: int

Position of the column. If the configured position is less than 0 or if it exceeds the total number of columns, then the column is appended to the right.

eventlist.customColumn.default

Type: string

Default value to display if the specified origin or event comment id was not found.

eventlist.customColumn.colors

Type: list:string

Mapping of comment values to colors used as text color. E.g. "foo:#000,bar:red".

Note

eventlist.scripts.* Custom columns showing parameters extracted by scripts e.g. from origins or events.

eventlist.scripts.columns

Type: list:string

Name of custom column profiles to be registered. Comma separated list.

Note

eventlist.scripts.column.* Definition of custom column profiles for creating custom event list columns whose values are filled by external scripts. The scolv documentation provides an example script.

Note

eventlist.scripts.column.$name.* $name is a placeholder for the name to be used and needs to be added to eventlist.scripts.profiles to become active.

eventlist.scripts.profiles = a,b
eventlist.scripts.column.a.value1 = ...
eventlist.scripts.column.b.value1 = ...
# c is not active because it has not been added
# to the list of eventlist.scripts.profiles
eventlist.scripts.column.c.value1 = ...

eventlist.scripts.column.$name.script

Type: path

External script to invoke for each event list entry. The object represented by the list entry is serialized to XML and passed to the script on stdin. If the return code of the script is 0 (‘success’) then the script result is read from stdout and displayed in the corresponding event list cell.

eventlist.scripts.column.$name.pos

Default: -1

Type: int

Position of the column. If the configured position is less than 0 or if it exceeds the total number of columns, then the column is appended to the right.

eventlist.scripts.column.$name.label

Type: string

Column name shown in header of event list table.

eventlist.scripts.column.$name.types

Type: list:string

Object types passed to the script. Supported values are ‘Event’ and ‘Origin’. Mandatory parameter.

Note

eventlist.filter.agencies.* Filter the loaded event list by agency ID.

eventlist.filter.agencies.label

Default: Show only own events

Type: string

Defines the text of the option "Show only own events". Use double quotes ‘"’ around the string if it contains spaces.

eventlist.filter.agencies.whitelist

Type: list:string

Sets a list of preferred agencies. Events from preferred agencies are defined as "own" events.

eventlist.filter.agencies.type

Default: events

Type: string

Sets the type of the filter. If type is "events" the agency of the preferred origin of the event is checked. If type is "origins" the agency of all origins of an event is checked and if at least one origins agency is part of the whitelist it will pass the filter. Or in other words, the event is hidden if no origin is from a preferred agency.

eventlist.filter.agencies.enabled

Default: false

Type: boolean

Sets the default state of the "Show only own events" option.

Note

eventlist.filter.regions.* Filter the loaded event list by region within or outside a bounding box. Register the profile name in the regions parameter.

eventlist.filter.regions.profiles

Type: list:string

Add the defined region profiles separated by comma. The order determines the ocurrence in the filter menu.

eventlist.filter.regions.enabled

Default: false

Type: boolean

Hide events by the defined region by default.

Note

eventlist.filter.regions.region.$name.* Define a rectangular region to filter the loaded event list. $name is a placeholder for the name to be used and needs to be added to eventlist.filter.regions.profiles to become active.

eventlist.filter.regions.profiles = a,b
eventlist.filter.regions.region.a.value1 = ...
eventlist.filter.regions.region.b.value1 = ...
# c is not active because it has not been added
# to the list of eventlist.filter.regions.profiles
eventlist.filter.regions.region.c.value1 = ...

eventlist.filter.regions.region.$name.name

Type: string

Defines the name of the region that shows up in the listbox.

eventlist.filter.regions.region.$name.rect

Type: list:double

Defines a rectangular region with a list of 4 values: latmin, lonmin, latmax, lonmax.

eventlist.filter.regions.region.$name.poly

Type: string

Defines the name of the polygon for the region check. If defined then the rect region has no effect. The configured polygon name is being search for in the global FEP regions and the spatial vector layer. The first polygon found with the given name will be taken.

Note

eventlist.filter.types.* Filter the loaded event list by event types.

eventlist.filter.types.label

Default: "Hide other/fake events"

Type: string

Defines the text of the option "Hide other/fake events". Use double quotes ‘"’ around the string if it contains spaces.

eventlist.filter.types.blacklist

Default: "not existing"

Type: list:string

List of event type to be hidden if the "Hide other/fake events" option is ticked. Use double quotes ‘"’ around the string if it contains spaces.

eventlist.filter.types.enabled

Default: true

Type: boolean

Sets the default state of the "Hide other/fake events" option.

Note

eventlist.filter.database.* Pre-set options to filter a database request to load events into the event list.

eventlist.filter.database.minlat

Type: double

Unit: deg

Minimum latitude

eventlist.filter.database.maxlat

Type: double

Unit: deg

Maximum latitude

eventlist.filter.database.minlon

Type: double

Unit: deg

Minimum longitude

eventlist.filter.database.maxlon

Type: double

Unit: deg

Maximum longitude

eventlist.filter.database.mindepth

Type: double

Unit: km

Minimum depth

eventlist.filter.database.maxdepth

Type: double

Unit: km

Maximum depth

eventlist.filter.database.minmag

Type: double

Minimum magnitude

eventlist.filter.database.maxmag

Type: double

Maximum magnitude

Note

eventedit.* Control the Event tab, e.g. in scolv, showing origins and focal mechanisms of a selected event.

eventedit.origin.visibleColumns

Default: Phases, Lat, Lon, Depth, DType, RMS, AzGap, Stat, Method, Agency, Author, Region, ID

Type: list:string

Configure the columns of the event edit origin table that are visible initially. Origin creation time and origin time are always visible. Possible values are:

Phases, Lat, Lon, Depth, DType, RMS, AzGap, Stat, Method, Agency, Author, Region, ID

Note

eventedit.origin.customColumn.* Custom column showing origin comments.

eventedit.origin.customColumn.name

Type: string

Name of the custom column to be shown in the column header.

eventedit.origin.customColumn.originCommentID

Type: string

ID of the origin comment to look up.

eventedit.origin.customColumn.pos

Default: -1

Type: int

Position of the column. If the configured position is less than 0 or if it exceeds the total number of columns then the column is appended to the right.

eventedit.origin.customColumn.default

Type: string

Default value to display if the specified origin or event comment id was not found.

eventedit.origin.customColumn.colors

Type: list:string

Mapping of comment values to colors used as text color. E.g. "foo:#000,bar:red".

eventedit.fm.visibleColumns

Default: Depth, M, Count, Misfit, STDR, AzGap, Stat, DC, CLVD, ISO, S1, D1, R1, S2, D2, R2, Agency, Author

Type: list:string

Configure the columns of the event edit focal mechanism tab that are visible initially. Possible values are: Depth, M, Count, Misfit, STDR, AzGap, Stat, DC, CLVD, ISO, S1, D1, R1, S2, D2, R2, Agency, Author

Note

eventsummary.* Parameters controlling the event summary view used e.g. in scolv.

eventsummary.alertTimer.commentId

Type: string

Set an alert for every event comment that ID matches the specified regular expression, e.g. "alert_.*".

eventsummary.alertTimer.commentBlacklist

Type: list:string

List of comments to ignore, e.g. "nil".

eventsummary.alertTimer.alertGradient

Type: list:string

Unit: s:color

Discrete mapping of time values in seconds to colors used as text color in case of an active alert. E.g. "0:00FF00,900:FF0000".

eventsummary.alertTimer.textSize

Type: int

Unit: pt

The text size of the time ago label in case of an active alert.

LOCSAT extension

Locator in SeisComP for computing source time and hypocenter coordinates from phase picks.

Note

LOCSAT.* Locator parameters: LOCSAT

LOCSAT.profiles

Default: iasp91, tab

Type: list:string

Defines a list of available LOCSAT travel-time tables.

LOCSAT.depthInit

Default: 20.0

Type: double

Unit: km

The initial depth estimate for LOCSAT.

LOCSAT.usePickUncertainties

Default: false

Type: boolean

Whether to use pick time untertainties for arrival deltim rather than a fixed time error. If true then the uncertainties are retrieved from each individual pick object. If they are not defined then the default pick time uncertainty will be used as fallback.

LOCSAT.defaultTimeError

Default: 1.0

Type: double

Unit: s

The default pick time uncertainty assigned to LOCSAT’s arrival deltim attribute if pick uncertainties are not going to be used or if they are absent. A time uncertainty of 0 s may result in errors of the SVD decomposition in LOCSAT.

LOCSAT.usePickBackazimuth

Default: true

Type: boolean

Whether to forward pick backazimuth to LOCSAT or not. In an automatic mode backazimuth measurements might be inaccurrate and disabling their usage in LOCSAT can be controlled with this parameter.

LOCSAT.usePickSlowness

Default: true

Type: boolean

Whether to forward pick horizontal slowness to LOCSAT or not. In an automatic mode slowness measurements might be inaccurrate and disabling their usage in LOCSAT can be controlled with this parameter.

LOCSAT.degreesOfFreedom

Default: 9999

Type: int

Number of degrees of freedom.

LOCSAT.confLevel

Default: 0.9

Type: double

Confidence level between 0.5 and 1.0.

LOCSAT.enableConfidenceEllipsoid

Default: false

Type: boolean

Compute the confidence ellipsoid from covariance matrix in 3D.

FixedHypocenter extension

Locator for re-computing source time with fixed hypocenter

Note

FixedHypocenter.* Locator parameters: FixedHypocenter

FixedHypocenter.profiles

Default: LOCSAT/iasp91,LOCSAT/tab

Type: list:string

Defines a list of available travel time tables. Each item is a tuple separated by a slash with format "[interface]/[model]". Built-in interfaces are "LOCSAT" and "libtau". Other interfaces might be added via plugins. Please check their documentation for the required interface name.

FixedHypocenter.usePickUncertainties

Default: false

Type: boolean

Whether to use pick time uncertainties rather than a fixed time error. If true, then the uncertainties are retrieved from each individual pick object. If they are not defined, then the default pick time uncertainty as defined by defaultTimeError will be used instead.

FixedHypocenter.defaultTimeError

Default: 1.0

Type: double

Unit: s

The default pick time uncertainty if pick uncertainties are not going to be used or if they are absent.

FixedHypocenter.degreesOfFreedom

Default: 8

Type: int

Number of degrees of freedom used for error estimate.

FixedHypocenter.confLevel

Default: 0.9

Type: double

Confidence level between 0.5 and 1.

Bindings Parameters

amplitudes.MLh.maxavg

Default: max

Type: string

Define combiner operation for both horizontals (min, max, avg).

amplitudes.MLh.ClippingThreshold

Type: double

MLh clipping level, in raw counts, eg. 80% of 2^23 = 6710886.

magnitudes.MLh.params

Type: string

Defines attenuation parameters for MLh. Format: "UpToKilometers A B; UpToNextKilometers A B;". Example: "30 nomag; 60 0.018 2.17; 700 0.0038 3.02". The first parameter set "30 nomag" means that up to 30km from the sensor the magnitude should not be calculated.

Note: No MLh computation if params is empty.

magnitudes.MLh.maxDepth

Default: 80

Type: double

Unit: km

Maximum depth allowed to compute the magnitude. Make sure to also update the MLh amplitude bindings accordingly to this value. maxDepth should not be greater than 80km.

magnitudes.md.seismo

Default: 9

Type: int

Default filter type to use before processing and after deconvolution. It’s possible to set : 1 for a Wood-Anderson seismometer 2 for a 5sec generic Seismometer 3 for a WWSSN LP seismometer 4 for a WSSN SP seismometer 5 for a Generic Seismometer 6 for a Butterworth Low pass filter 7 for a Butterworth High pass filter 8 for a Butterworth Band pass filter 9 for a 1Hz eigen-frequency L4C seismometer

magnitudes.md.taper

Default: 5

Type: double

Unit: s

taper applied to the signal

magnitudes.md.signal_length

Default: 150

Type: double

Unit: s

signal length used to compute the duration magnitude

magnitudes.md.butterworth

Default: "3,1.5"

Type: string

Butterworth filter parameter applied to the signal

magnitudes.md.depthmax

Default: 200

Type: double

Unit: km

Maximum depth at which duration magnitude is valid

magnitudes.md.deltamax

Default: 400

Type: double

Unit: km

Maximum distance between earthquake and station at which duration magnitude is valid

magnitudes.md.snrmin

Default: 1.2

Type: double

Signal to noise ratio below which the coda is reached

magnitudes.md.mdmax

Default: 5.0

Type: double

Maximum expected duration magnitude value This is used to find how much data should be loaded for a given station by reversing the formula

magnitudes.md.fma

Default: -0.87

Type: double

FMA regional coefficient See Hypo2000 manual

magnitudes.md.fmb

Default: 2.0

Type: double

FMB regional coefficient See Hypo2000 manual

magnitudes.md.fmd

Default: 0.0035

Type: double

FMD regional coefficient See Hypo2000 manual

magnitudes.md.fmf

Default: 0.0

Type: double

FMF regional coefficient See Hypo2000 manual

magnitudes.md.fmz

Default: 0.0

Type: double

FMZ regional coefficient See Hypo2000 manual

magnitudes.md.linearcorrection

Default: 1.0

Type: double

Linear correction

magnitudes.md.offset

Default: 0.0

Type: double

Offset

magnitudes.md.stacor

Default: 0.0

Type: double

Station correction

Note

magnitudes.MLr.* Parameter for computing MLr magnitudes for GNS/Geonet from MLv amplitudes.

magnitudes.MLr.params

Type: string

Defines Stations Corrections parameters for MLr (GNS/Geonet Local magnitude). Format: "UpToKilometers A ; UpToNextKilometers A ;". Example: "30 nomag; 60 0.018 ; 700 0.0038 ". The first parameter set "30 nomag" means that up to 30km from the sensor the magnitude should not be calculated. A is used as station correction. "nomag" is used to disable station magnitudes.

Note: No MLr computation if params is empty.

Note

amplitudes.MN.* Parameters for measuring AMN amplitudes.

amplitudes.MN.rms

Default: false

Type: boolean

Whether to use RMS ratio of signal and noise window for SNR computation or the ration of the peak-trough amplitudes of either window.

amplitudes.MN.filter

Type: string

The configurable filter such that the V measurement is made on a filtered trace. By default, filtering is not enabled.

See https://docs.gempa.de/seiscomp/current/base/filter-grammar.html for how to specify the filter.

amplitudes.MN.Vmin

Default: 3.2

Type: double

Unit: km/s

The minimum phase velocity used to determine the signal window end.

amplitudes.MN.Vmax

Default: 3.6

Type: double

Unit: km/s

The maximum phase velocity used to determine the signal window start.

amplitudes.MN.snrWindowSeconds

Default: 10

Type: double

Unit: s

The length of the SNR window.

amplitudes.MN.noiseWindowPreSeconds

Default: 0

Type: double

Unit: s

The offset of the noise window. A positive value will move the computed noise window to the left on the time axis, a negative value will move it to the right on the time axis.

amplitudes.MN.signalStartPriorities

Default: Lg,Sg,Sn,S,Vmax

Type: list:string

The priority list of phase onsets to compute the signal start window. Except for Vmin and Vmax, associated phases (arrivals) must be present in the origin for this particular phase. Picked phases are only considered if the origin is a manual origin or the pick is a manual pick. The first value in the list which can be retrieved or computed, is selected.

Allowed tokens: Pg, Pn, P, Sg, Sn, S, Lg, Rg, Vmin, Vmax

amplitudes.MN.signalEndPriorities

Default: Rg,Vmin

Type: list:string

The priority list of phase onsets to compute the signal end window. Except for Vmin and Vmax, associated phases (arrivals) must be present in the origin for this particular phase. Picked phases are only considered if the origin is a manual origin or the pick is a manual pick. The first value in the list which can be retrieved or computed, is selected.

Allowed tokens: Pg, Pn, P, Sg, Sn, S, Lg, Rg, Vmin, Vmax

Note

magnitudes.MN.* Parameters for computing MN magnitudes from AMN amplitudes.

magnitudes.MN.minSNR

Default: 2

Type: double

The minimum SNR required for a magnitude to pass the QC check. The station magnitude will be computed anyway but if the SNR is below this threshold it will be associated with weight zero and will not contribute to the network magnitude.

magnitudes.MN.minPeriod

Default: 0.01

Type: double

Unit: s

The minimum period required for a magnitude to pass the QC check. The station magnitude will be computed anyway but if the period is below this threshold it will be associated with weight zero and will not contribute to the network magnitude.

magnitudes.MN.maxPeriod

Default: 1.3

Type: double

Unit: s

The maximum period allowed for a magnitude to pass the QC check. The station magnitude will be computed anyway but if the period is above this threshold it will be associated with weight zero and will not contribute to the network magnitude.

magnitudes.MN.minDist

Default: 0.5

Type: double

Unit: deg

The minimum distance required for a magnitude to pass the QC check. The station magnitude will be computed anyway but if the distance is below this threshold it will be associated with weight zero and will not contribute to the network magnitude.

magnitudes.MN.maxDist

Default: 30

Type: double

Unit: deg

The maximum distance allowed for a magnitude to be computed. If the distance exceeds this threshold then the computation will be canceled and no station magnitude will be available at all.

detecLocid

Type: string

The sensor location code of the preferred stream used e.g. by scautopick and scrttv.

detecStream

Type: string

The channel code of the preferred stream used by e.g. scautopick and scrttv. If no component code is given, the vertical component will be fetched from inventory considering the channel orientation (azimuth, dip). If that approach fails, ‘Z’ will be appended and used as fallback. Do not use regular expressions!

Note

amplitudes.* Define general parameters for amplitudes of a certain type. Create amplitude type profiles to define the time windows, minimum signal-to-noise ratio, amplitude thresholds and restitution for measuring amplitudes of a certain type.

amplitudes.saturationThreshold

Default: false

Type: string

Unit: counts; %

Define the saturation threshold for the optional saturation check. By default, the saturation check is disabled but giving a value above 0 will enable it. Waveforms that are saturated are not used for amplitude calculations.

This value can either be an absolute value of counts such as "100000" counts or a relative value (optionally in percent) with respect to the number of effective bits, e.g. "0.8@23" or "80%@23". The first version uses 1**23 * 0.8 whereas the latter uses 1**23 * 80/100.

The boolean value "false" explicitly disables the check.

amplitudes.enable

Default: true

Type: boolean

Define if amplitude calculation is enabled. If disabled, this station will be skipped for amplitudes and magnitudes.

amplitudes.enableResponses

Default: false

Type: boolean

Activate deconvolution for this station. If no responses are configured, an error is raised and the data is not processed. This flag will be overridden by the type specific flag (see GlobalAmplitudeProfile).

Note

amplitudes.$name.* An amplitude profile configures global parameters for a particular amplitude type. The available amplitude types are not fixed and can be extended by plugins. The name of the type must match the one defined in the corresponding AmplitudeProcessor. $name is a placeholder for the name to be used.

amplitudes.$name.saturationThreshold

Default: false

Type: string

Unit: counts; %

Define the saturation threshold for the optional saturation check. By default, the saturation check is disabled but giving a value above 0 will enable it. Waveforms that are saturated are not used for amplitude calculations.

This value can either be an absolute value of counts such as "100000" counts or a relative value (optionally in percent) with respect to the number of effective bits, e.g. "0.8@23" or "80%@23". The first version uses 1**23 * 0.8 whereas the latter uses 1**23 * 80/100.

The boolean value "false" explicitly disables the check.

amplitudes.$name.enable

Default: true

Type: boolean

Define if amplitude calculation of certain type is enabled.

amplitudes.$name.enableResponses

Default: false

Type: boolean

Activate deconvolution for this amplitude type. If not set, the global flag "amplitudes.enableResponses" will be used instead.

amplitudes.$name.minSNR

Type: double

Define the minimum SNR to be reached to compute the amplitudes. This value is amplitude type specific and has no global default value.

amplitudes.$name.noiseBegin

Type: double

Unit: s

Override the default time (relative to the trigger time) of the begin of the noise window used to compute the noise offset and noise amplitude. Each amplitude processor sets its own noise time window and this option should only be changed if you know what you are doing.

amplitudes.$name.noiseEnd

Type: double

Unit: s

Override the default time (relative to the trigger time) of the end of the noise window used to compute the noise offset and noise amplitude. Each amplitude processor sets its own noise time window and this option should only be changed if you know what you are doing.

amplitudes.$name.signalBegin

Type: double

Unit: s

Override the default time (relative to the trigger time) of the begin of the signal window used to compute the final amplitude. Each amplitude processor sets its own signal time window and this option should only be changed if you know what you are doing.

amplitudes.$name.signalEnd

Type: double

Unit: s

Override the default time (relative to the trigger time) of the end of the signal window used to compute the final amplitude. Each amplitude processor sets its own signal time window and this option should only be changed if you know what you are doing.

amplitudes.$name.minDist

Type: double

Unit: deg

The minimum distance required to compute an amplitude. This settings has no effect with e.g. scautopick as there is no information about the source of the event to compute the distance. The default value is implementation specific.

amplitudes.$name.maxDist

Type: double

Unit: deg

The maximum distance allowed to compute an amplitude. This settings has no effect with e.g. scautopick as there is no information about the source of the event to compute the distance. The default value is implementation specific.

amplitudes.$name.minDepth

Type: double

Unit: km

The minimum depth required to compute an amplitude. This settings has no effect with e.g. scautopick as there is no information about the source of the event to retrieve the depth. The default value is implementation specific.

amplitudes.$name.maxDepth

Type: double

Unit: km

The maximum depth allowed to compute an amplitude. This settings has no effect with e.g. scautopick as there is no information about the source of the event to retrieve the depth. The default value is implementation specific.

amplitudes.$name.regionalize

Default: true

Type: boolean

Control if the amplitude calculation should be regionalized or not. The regions and their configuration are taken from the corresponding magnitude profiles. If regionalization is activate, then e.g. modules without origin information will not be able to compute an amplitude as the origin is required to determine the effective settings.

If amplitudes for this particular type shall be computed regardless of any defined regions, set this parameter to false.

Note

amplitudes.$name.resp.* Several parameters if usage of full responses is enabled.

amplitudes.$name.resp.taper

Default: 5

Unit: s

Define the length of the taper at either side of the waveform. The length will be added to the data request: start - taper and end + taper.

amplitudes.$name.resp.minFreq

Default: 0.00833333

Unit: Hz

After data are converted in to the frequency domain that minimum frequency defines the end of the left-side cosine taper for the frequency spectrum. The taper applies from 0 Hz to {minFreq} Hz. A value of 0 or lower disables that taper.

amplitudes.$name.resp.maxFreq

Default: 0

Unit: Hz

After data are converted in to the frequency domain that maximum frequency defines the start of the right-side cosine taper for the frequency spectrum. The taper applies from {maxFreq} Hz to {fNyquist} Hz. A value of 0 or lower disables that taper.

Note

amplitudes.resp.* Several parameters if usage of full responses is enabled. The parameters of this group will be overridden by type specific settings if given (see GlobalAmplitudeProfile).

amplitudes.resp.taper

Default: 5

Unit: s

Define the length of the taper at either side of the waveform. The length will be added to the data request: start - taper and end + taper.

amplitudes.resp.minFreq

Default: 0.00833333

Unit: Hz

The minimum frequency of the considered spectrum.

After data is converted into the frequency domain that minimum frequency defines the end of the left-side cosine taper applied to the spectrum. The taper applies from 0 Hz to {minFreq} Hz. A value of 0 or lower disables that taper.

amplitudes.resp.maxFreq

Default: 0

Unit: Hz

The maximum frequency of the considered spectrum.

After data are converted in to the frequency domain that maximum frequency defines the start of the right-side cosine taper applied to the spectrum. The taper applies from {maxFreq} Hz to {fNyquist} Hz. A value of 0 or lower disables that taper.

Note

amplitudes.ttt.* Travel time table specific parameters to be used for the computation of travel times referred to in signal and noise time window specifications, e.g. “signalBegin”.

amplitudes.ttt.interface

Default: libtau

Type: string

No description available

amplitudes.ttt.model

Default: iasp91

Type: string

No description available

Note

amplitudes.WoodAnderson.* Parameters of the Wood-Anderson seismometer response used for instrument simulation. The default values are according to Uhrhammer and Collins (1990) and were part of the IASPEI Magnitude Working Group recommendations of 2011 September 9.

amplitudes.WoodAnderson.gain

Default: 2080

Type: double

The gain of the Wood-Anderson response.

amplitudes.WoodAnderson.T0

Default: 0.8

Type: double

Unit: s

The eigenperiod of the Wood-Anderson seismometer.

amplitudes.WoodAnderson.h

Default: 0.7

Type: double

The damping constant of the Wood-Anderson seismometer.

Note

magnitudes.* Define magnitude parameters independent of amplitude-type profiles. For magnitude correction parameters, e.g., network of station corrections, create a magnitude type profile.

Note

magnitudes.$name.* A magnitude profile configures global parameters for a particular magnitude type. The available magnitude types are not fixed and can be extended by plugins. The name of the type must match the one defined in the corresponding MagnitudeProcessor. $name is a placeholder for the name to be used.

magnitudes.$name.multiplier

Default: 1

Type: list:string

Part of the magnitude station correction. The final magnitude value is multiplier*M+offset. This value can be regionalized with name-value pairs. The name is the name of the region. Without a name the value is the default without regionalization. Example: "1.0, regionA: 0.9, regionB: 1.1".

magnitudes.$name.offset

Default: 0

Type: list:string

Part of the magnitude station correction. The final magnitude value is multiplier*M+offset. This value can be regionalized with name-value pairs. The name is the name of the region. Without a name the value is the default without regionalization. Example: "0.0, regionA: -0.1, regionB: 0.2".

Note

picker.* Parameters controlling the second-stage picker for re-picking P phases after an initial detection.

Note

picker.AIC.* AIC picker is an implementation using the simple non-AR algorithm of Maeda (1985), see paper of Zhang et al. (2003) in BSSA. The picker interface name to be used in configuration files, e.g. of scautopick, is “AIC”.

picker.AIC.noiseBegin

Default: 0

Type: double

Unit: s

Override the relative data acquisition time (relative to the triggering pick). This adds a margin to the actual processing and is useful to initialize the filter (Example: bandpass). The data is not used at all until signalBegin is reached. The data time window start is the minimum of noiseBegin and signalBegin.

picker.AIC.signalBegin

Default: -30

Type: double

Unit: s

Override the default time (relative to the trigger time) of the begin of the signal window used to pick.

picker.AIC.signalEnd

Default: 10

Type: double

Unit: s

Override the default time (relative to the trigger time) of the begin of the signal window used to pick.

picker.AIC.filter

Type: string

Override the default filter which is "raw". The typical filter grammar can be used.

picker.AIC.minSNR

Default: 3

Type: double

Mininum SNR as returned from AIC for accepting picks.

Note

picker.BK.* Bkpicker is an implementation of the Baer/Kradolfer picker adapted to SeisComP. It was created by converting Manfred Baers from FORTRAN to C++ and inserting it as a replacement for the picker algorithm. The picker interface name to be used in configuration files, e.g. of scautopick,is “BK”.

picker.BK.noiseBegin

Default: 0

Type: double

Unit: s

Override the relative data acquisition time (relative to the triggering pick). This adds a margin to the actual processing and is useful to initialize the filter (Example: bandpass). The data is not used at all until signalBegin is reached. The data time window start is the minimum of noiseBegin and signalBegin.

picker.BK.signalBegin

Default: -20

Type: double

Unit: s

Override the default time (relative to the trigger time) of the begin of the signal window used to pick.

picker.BK.signalEnd

Default: 80

Type: double

Unit: s

Override the default time (relative to the trigger time) of the begin of the signal window used to pick.

picker.BK.filterType

Default: BP

Type: string

BP (bandpass) is currently the only option.

picker.BK.filterPoles

Default: 2

Type: int

Number of poles.

picker.BK.f1

Default: 5

Type: double

Unit: Hz

Bandpass lower cutoff freq. in Hz.

picker.BK.f2

Default: 20

Type: double

Unit: Hz

Bandpass upper cutoff freq. in Hz.

picker.BK.thrshl1

Default: 10

Type: double

Threshold to trigger for pick (c.f. paper), default 10

picker.BK.thrshl2

Default: 20

Type: double

Threshold for updating sigma (c.f. paper), default 20

Note

spicker.* Parameters controlling the secondary picker. Example: for picking S phases.

Note

spicker.L2.* L2 is an algorithm to pick S-phases based on existing P-phases. It works by creating the L2 norm of the two filtered horizontal components and then running the `detecFilter` on the L2 trace to find the S pick. Finally AIC is applied around the detected pick time to refine the detection. The picker name to be used in configuration files is “S-L2”.

spicker.L2.noiseBegin

Default: -10

Type: double

Unit: s

Override the relative data processing start time (relative to the triggering pick). This adds a margin to the actual processing and is useful to initialize the filter (Example: bandpass). The data is not used at all until signalBegin is reached. The data time window start is the minimum of noiseBegin and signalBegin.

spicker.L2.signalBegin

Default: 0

Type: double

Unit: s

Override the relative start time (relative to the triggering pick) of the begin of the signal processing.

spicker.L2.signalEnd

Default: 60

Type: double

Unit: s

Override the relative end time (relative to the triggering pick) of the end of the signal window used to pick.

spicker.L2.filter

Default: BW(4,0.3,1.0)

Type: string

Configure the filter used to process the horizontal components traces before computing the L2-norm.

spicker.L2.detecFilter

Default: STALTA(1,10)

Type: string

Configure the detector filter applied on the filtered L2 trace.

spicker.L2.threshold

Default: 3

Type: double

The detector threshold that triggers the AIC picker.

spicker.L2.timeCorr

Default: 0

Type: double

Unit: s

The time correction added to the detection time before AIC time window is computed.

spicker.L2.marginAIC

Default: 5

Type: double

Unit: s

The AIC time window around the detection used to pick. If 0, AIC is not used.

spicker.L2.minSNR

Default: 15

Type: double

Minimum SNR as returned from AIC for accepting picks.

Note

spicker.V.* This S-picker works similarly to L2 but it only uses the vertical component to pick S-phases. The picker name to be used in configuration files is “S-V”.

spicker.V.noiseBegin

Default: -10

Type: double

Unit: s

Override the relative data processing start time (relative to the triggering pick). This adds a margin to the actual processing and is useful to initialize the filter (Example: bandpass). The data is not used at all until signalBegin is reached. The data time window start is the minimum of noiseBegin and signalBegin.

spicker.V.signalBegin

Default: 0

Type: double

Unit: s

Override the relative start time (relative to the triggering pick) of the begin of the signal processing.

spicker.V.signalEnd

Default: 60

Type: double

Unit: s

Override the relative end time (relative to the triggering pick) of the end of the signal window used to pick.

spicker.V.filter

Default: BW(4,0.3,1.0)

Type: string

Configure the filter used to process the raw vertical component data.

spicker.V.detecFilter

Default: STALTA(1,10)

Type: string

Configure the detector filter applied on filtered data.

spicker.V.threshold

Default: 3

Type: double

The detector threshold that triggers the AIC picker.

spicker.V.timeCorr

Default: 0

Type: double

Unit: s

The time correction added to the detection time before AIC time window is computed.

spicker.V.marginAIC

Default: 5

Type: double

Unit: s

The AIC time window around the detection used to pick. If 0, AIC is not used.

spicker.V.minSNR

Default: 15

Type: double

Define the mininum SNR as returned from AIC.

Note

fx.* Feature extraction types, e.g. for scautopick.

Note

fx.DFX.* Three component feature extraction algorithm ported from the automatic processing system implemented at CTBTO/IDC. The documentation of the methods is not publically available. In case of questions and comments, please contact CTBTO by email: support@ctbto.org.

Note

fx.DFX.filter.* Butterworth filter options of the bandpass.

fx.DFX.filter.order

Default: 3

Type: int

The order of the filter.

fx.DFX.filter.loFreq

Default: 1

Type: double

Unit: Hz

The lower cut-off frequency. A negative value or zero will disable a lower cut-off frequency.

fx.DFX.filter.hiFreq

Default: 3

Type: double

Unit: Hz

The upper cut-off frequency. A negative value or zero will disable a upper cut-off frequency.

fx.DFX.polar.window

Default: 1.5

Type: double

Unit: s

Length of the covariance window in seconds.

fx.DFX.polar.overlap

Default: 0.5

Type: double

The fraction of the covariance window to overlap.

fx.DFX.polar.alpha

Default: 0.3

Type: double

A station-dependent parameter used to compute a polarization slowness estimate.

fx.DFX.polar.ds

Default: 0.03

Type: double

A station-dependent parameter used to compute the back azimuth and slowness errors.

fx.DFX.polar.dk

Default: 0.1

Type: double

A station-dependent parameter used to compute the back azimuth and slowness errors.

Note

magnitudes.mB.* Parameters for computing mB magnitudes from mB amplitudes.

magnitudes.mB.minDist

Default: 5

Type: double

Unit: deg

Minimum epicentral distance for computing mB. Note: According to the IASPEI recommendations in 2013, the minimum distance should be 20 deg.

magnitudes.mB.maxDist

Default: 105

Type: double

Unit: deg

Maximum epicentral distance for computing mB.

Note

magnitudes.mb.* Parameters for computing mb magnitudes from mb amplitudes.

magnitudes.mb.minDist

Default: 5

Type: double

Unit: deg

Minimum epicentral distance for computing mb. Note: According to the IASPEI recommendations in 2013, the minimum distance should be 20 deg.

magnitudes.mb.maxDist

Default: 105

Type: double

Unit: deg

Maximum epicentral distance for computing mb.

magnitudes.mb(IDC).Q

Type: path

Location of the station specific Q table. If not specified then @DATADIR@/magnitudes/IDC/qfvc.ml will be used as fallback. {net}, {sta} and {loc} are placeholders which will be replaced with the concrete network code, station code and location code.

Note

amplitudes.Ms_20.* Parameters for computing Ms_20 amplitudes.

amplitudes.Ms_20.minVelocity

Default: 3

Type: double

Unit: km/s

Minimum group velocity used to compute signal time window.

amplitudes.Ms_20.maxVelocity

Default: 4

Type: double

Unit: km/s

Maximum group velocity used to compute signal time window.

Note

magnitudes.Ms_20.* Parameters for computing Ms_20 magnitudes from Ms_20 amplitudes.

magnitudes.Ms_20.lowerPeriod

Default: 18

Type: double

Unit: s

Lower period limit of the signal for computing Ms_20.

magnitudes.Ms_20.upperPeriod

Default: 22

Type: double

Unit: s

Upper period limit of the signal for computing Ms_20.

magnitudes.Ms_20.minDist

Default: 20

Type: double

Unit: deg

Minimum epicentral distance for computing Ms_20.

magnitudes.Ms_20.maxDist

Default: 160

Type: double

Unit: deg

Maximum epicentral distance for computing Ms_20.

magnitudes.Ms_20.maxDepth

Default: 100

Type: double

Unit: km

Maximum depth for computing Ms_20.

Note

amplitudes.MLc.* Parameters for measuring MLc amplitudes. Add more parameters by adding an amplitude type profile ‘MLc’,

amplitudes.MLc.preFilter

Default: BW(3,0.5,12)

Type: string

The filter applied to raw records before applying Wood-Anderson simulation.

amplitudes.MLc.applyWoodAnderson

Default: true

Type: boolean

Applying Wood-Anderson simulation. To achieve displacement records without WA simulation, an integration filter can be applied with the pre-filter.

amplitudes.MLc.amplitudeScale

Default: 1.0

Type: string

Scaling value multiplied to the measured amplitudes to match the amplitude units expected by the magnitude calibration function.

Expected amplitudes are in units of mym but actual amplitudes provided from Wood-Anderson-corrected seismograms are in units of mm: amplitudeScale = 1000.

If data are not corrected for WA, measured amplitudes take the unit of gain-corrected data considering the preFilter: amplitudeScale converts between units of measured and excpected amplitude.

amplitudes.MLc.measureType

Default: AbsMax

Type: string

Type for measuring amplitudes. Available:

AbsMax: absolute maximum

MinMax: half difference between absolute maximum and minimum

PeakTrough: half difference between maximum and minimum on a half cycle

amplitudes.MLc.combiner

Default: max

Type: string

Define how to combine the amplitudes measured on both horizontals components:

min: take the minimum

max: take the maxium

avgerage: form the average

geometric_mean: form the geometric mean

Note

magnitudes.MLc.* Parameters for computing MLc magnitudes from MLc amplitudes.

magnitudes.MLc.distMode

Default: hypocentral

Type: string

Considered distance measure between source and receiver. Possible values are

hypocentral: hypocentral distance

epicentral: epicentral distance

magnitudes.MLc.minDist

Default: -1.0

Type: double

Unit: deg

The minimum distance for computing magnitudes from amplitudes. Negative values deactivate the check.

magnitudes.MLc.maxDist

Default: 8

Type: double

Unit: deg

The maximum distance for computing magnitudes from amplitudes. Negative values deactivate the check.

magnitudes.MLc.maxDepth

Default: 80

Type: double

Unit: km

The maximum source depth up to which magnitudes are computed.

magnitudes.MLc.calibrationType

Default: "parametric"

Type: string

Type of magnitude calibration formula to be considered. The calibration parameters are considered accordingly. Currently supported are

"parametric": consider parameters of parametric configuration in parametric section

"A0": consider parameters of non-parametric configuration in A0 section.

Note

magnitudes.MLc.A0.* Parameters for A0, non-parametric magnitude calibration. Considered if magnitude.MLc.calibrationType = “A0”.

magnitudes.MLc.A0.logA0

Default: 0:-1.3,60:-2.8,100:-3.0,400:-4.5,1000:-5.85

Type: string

The non-parametric calibration function log10(A0).

Format: any list of distance-value pairs separated by comma. Values within pairs are separated by colon.

Example: "0:-1.3,60:-2.8,100:-3.0,400:-4.5,1000:-5.85" specifies 4 distance intervals from 0…60, 60…100, 100…400 and 400…1000 km distance. Within these intervals log10(A0) is interpolated linearly between -1.3…-2.8, -2.8…-3.0, -3.0…-4.5 and -4.5…-5.8, respectively.

Note: The first and last distance samples limit the maximum distance range for computing MLv.

Note

magnitudes.MLc.parametric.* Parameters for parametric magnitude calibration: MLc = log10(A) + c3 * log10(r/c5) + c2 * (r + c4) + c1 + c0(station) ** Considered if magnitude.MLc.calibrationType = “parametric”.

magnitudes.MLc.parametric.c0

Default: 0.0

Type: double

Station correction. This is the calibration value ‘c0’ applied in the parametric magnitude calibration formula.

magnitudes.MLc.parametric.c1

Default: 0.69

Type: double

The calibration value ‘c1’ applied in the parametric magnitude calibration formula.

magnitudes.MLc.parametric.c2

Default: 0.00095

Type: double

The calibration value ‘c2’ applied in the magnitude calibration formula parametric magnitude calibration formula.

magnitudes.MLc.parametric.c3

Default: 1.11

Type: double

The calibration value ‘c3’ applied in the parametric magnitude calibration formula.

magnitudes.MLc.parametric.c4

Default: 0.0

Type: double

The calibration value ‘c4’ applied in the parametric magnitude calibration formula.

magnitudes.MLc.parametric.c5

Default: 1.0

Type: double

The calibration value ‘c5’ applied in the parametric magnitude calibration formula.

Note

amplitudes.MLv.* Parameters for measuring MLv amplitudes. Add more parameters by adding an amplitude type profile ‘MLv’,

amplitudes.MLv.preFilter

Type: string

The filter applied to raw records before applying Wood-Anderson simulation. Default: no pre-filtering.

amplitudes.MLv.measureType

Default: AbsMax

Type: string

This parameter allows to set how the amplitude is measured. Either by finding the absolute maximum of the demeaned trace (AbsMax), the difference of maximum and minimum of the signal window (MinMax) or the maximum peak-trough of one cycle (PeakTrough).

Note that if absMax is already explicitly configured, this parameter has no effect.

Note

magnitudes.MLv.* Parameters for computing MLv magnitudes from MLv amplitudes.

magnitudes.MLv.logA0

Default: 0:-1.3,60:-2.8,100:-3.0,400:-4.5,1000:-5.85

Type: string

The calibration function log10(A0).

Format: any list of distance-value pairs separated by comma. Values within pairs are separated by colon.

Example: "0:-1.3,60:-2.8,100:-3.0,400:-4.5,1000:-5.85" specifies 4 distance intervals from 0…60, 60…100, 100…400 and 400…1000 km distance. Within these intervals log10(A0) is interpolated linearly between -1.3…-2.8, -2.8…-3.0, -3.0…-4.5 and -4.5…-5.8, respectively.

Note: The first and last distance samples limit the maximum distance range for computing MLv.

magnitudes.MLv.maxDistanceKm

Default: -1.0

Type: double

Unit: km

Maximum epicentral distance for computing MLv. No distance limitation for maxDistanceKm=-1

Note

amplitudes.ML.* Parameters for measuring ML amplitudes. Add more parameters by adding an amplitude type profile ‘ML’,

amplitudes.ML.preFilter

Type: string

The filter applied to raw records before applying Wood-Anderson simulation. Default: no pre-filtering.

amplitudes.ML.measureType

Default: AbsMax

Type: string

This parameter allows to set how the amplitude is measured. Either by finding the absolute maximum of the demeaned trace (AbsMax), the difference of maximum and minimum of the signal window (MinMax) or the maximum peak-trough of one cycle (PeakTrough).

Note that if absMax is already explicitly configured, this parameter has no effect.

amplitudes.ML.combiner

Default: average

Type: string

Defines the combiner operation for the amplitudes measured on either both horizontal component. The default is to use the average. Allowed values are: "average", "min", "max" and "geometric_mean". "geometric_mean" corresponds to averaging single-trace magnitudes instead of their amplitudes.

Note

magnitudes.ML.* Parameters for computing ML magnitudes from ML amplitudes.

magnitudes.ML.logA0

Default: 0:-1.3,60:-2.8,100:-3.0,400:-4.5,1000:-5.85

Type: string

The calibration function log10(A0).

Format: any list of distance-value pairs separated by comma. Values within pairs are separated by colon.

Example: "0:-1.3,60:-2.8,100:-3.0,400:-4.5,1000:-5.85" specifies 4 distance intervals from 0…60, 60…100, 100…400 and 400…1000 km distance. Within these intervals log10(A0) is interpolated linearly between -1.3…-2.8, -2.8…-3.0, -3.0…-4.5 and -4.5…-5.8, respectively.

Note: The first and last distance samples limit the maximum distance range for computing ML.

magnitudes.ML.maxDistanceKm

Default: -1.0

Type: double

Unit: km

Maximum epicentral distance for computing ML. No distance limitation for maxDistanceKm = -1.

magnitudes.ML(IDC).A

Type: path

Location of the station specific attenuation table. If not specified then @DATADIR@/magnitudes/IDC/global.ml will be used as fallback. {net}, {sta} and {loc} are placeholders which will be replaced with the concrete network code, station code and location code.

Command-Line Options

Generic

-h, --help

Show help message.

-V, --version

Show version information.

--config-file arg

Use alternative configuration file. When this option is used the loading of all stages is disabled. Only the given configuration file is parsed and used. To use another name for the configuration create a symbolic link of the application or copy it. Example: scautopick -> scautopick2.

--plugins arg

Load given plugins.

-D, --daemon

Run as daemon. This means the application will fork itself and doesn’t need to be started with &.

--auto-shutdown arg

Enable/disable self-shutdown because a master module shutdown. This only works when messaging is enabled and the master module sends a shutdown message (enabled with --start-stop-msg for the master module).

--shutdown-master-module arg

Set the name of the master-module used for auto-shutdown. This is the application name of the module actually started. If symlinks are used, then it is the name of the symlinked application.

--shutdown-master-username arg

Set the name of the master-username of the messaging used for auto-shutdown. If "shutdown-master-module" is given as well, this parameter is ignored.

Verbose

--verbosity arg

Verbosity level [0..4]. 0:quiet, 1:error, 2:warning, 3:info, 4:debug.

-v, --v

Increase verbosity level (may be repeated, eg. -vv).

-q, --quiet

Quiet mode: no logging output.

--print-component arg

For each log entry print the component right after the log level. By default the component output is enabled for file output but disabled for console output.

--print-context arg

For each log entry print the source file name and line number.

--component arg

Limit the logging to a certain component. This option can be given more than once.

-s, --syslog

Use syslog logging backend. The output usually goes to /var/lib/messages.

-l, --lockfile arg

Path to lock file.

--console arg

Send log output to stdout.

--debug

Execute in debug mode. Equivalent to --verbosity=4 --console=1 .

--trace

Execute in trace mode. Equivalent to --verbosity=4 --console=1 --print-component=1 --print-context=1 .

--log-file arg

Use alternative log file.

Messaging

-u, --user arg

Overrides configuration parameter connection.username.

-H, --host arg

Overrides configuration parameter connection.server.

-t, --timeout arg

Overrides configuration parameter connection.timeout.

-g, --primary-group arg

Overrides configuration parameter connection.primaryGroup.

-S, --subscribe-group arg

A group to subscribe to. This option can be given more than once.

--content-type arg

Overrides configuration parameter connection.contentType.

--start-stop-msg arg

Set sending of a start and a stop message.

Database

--db-driver-list

List all supported database drivers.

-d, --database arg

The database connection string, format: service://user:pwd@host/database. "service" is the name of the database driver which can be queried with "--db-driver-list".

--config-module arg

The config module to use.

--inventory-db arg

Load the inventory from the given database or file, format: [service://]location .

--config-db arg

Load the configuration from the given database or file, format: [service://]location .

Records

--record-driver-list

List all supported record stream drivers.

-I, --record-url arg

The recordstream source URL, format: [service://]location[#type]. "service" is the name of the recordstream driver which can be queried with "--record-driver-list". If "service" is not given, "file://" is used.

--record-file arg

Specify a file as record source.

--record-type arg

Specify a type for the records being read.

Cities

--city-xml arg

The path to the cities XML file. This overrides the default paths. Compare with the global parameter "citiesXML".

User interface

-F, --full-screen

Start the application filling the entire screen. This only works with GUI applications.

-N, --non-interactive

Use non-interactive presentation mode. This only works with GUI applications.