Installation on Ubuntu

You will …

  • Make a basic SeisComP installation

Pre-requisites for this tutorial:

  • Internet access

Afterwards/Results/Outcomes:

  • Run a SeisComP executable

  • Run a SeisComP GUI program

Time range estimate:

  • 10-15 minutes

Related tutorial(s):

You may install SeisComP by:

  1. Compiling the source code,

  2. Installing pre-compiled release packages including binaries, maps and documentation.

Get your Linux System ready

First you need to get your Linux system ready. The following documentation refers to Ubuntu 20.04, but the steps for other Ubuntu versions are similar.

  1. Add a new user. Throughout our documentation, this user is called sysop.

    $ sudo adduser sysop
$ sudo addgroup admin
$ sudo usermod -a -G admin,adm,audio sysop

  2. Check the size and the architecture. This is espcially required when installing pre-compiled packages:

    $ df -h
$ cat /etc/issue
$ uname -m

    Compare the available disk space with the requirements given in the SeisComP Installation section. If ‘uname’ shows ‘i686’, you have a 32-bit system; if you see ‘x86_64’, you have 64-bit.

Install from source code

To compile SeisComP from the source code follow the instructions in the development section. You may later download and add maps as described below in the package section.

Install pre-compiled release packages

You may download and installed pre-compile SeisComP binary package, maps and documentation.

  1. Download the appropriate SeisComP binary package taking into account your Linux distribution and the architecture. Get the package from the SeisComP package downloader 1 or gempa GmbH 2. Packages are available for Ubuntu and other Linux flavors such as CentOS and Debian.

  2. When getting packages from SeisComP package downloader 1 you should also download

    Note

    The SeisComP packages received from gempa GmbH contain the documentation for the respective version and no separate download is required.

  3. Untar the seiscomp* files (binary package, maps and documentation) you will find in your home or downloads directory. For SeisComP in version 4.0.0 this is:

    $ cd
$ tar xzf seiscomp-4.0.0-ubuntu20.04-x86_64.tar.gz
$ tar xzf seiscomp-maps.tar.gz
$ tar xzf seiscomp-4.0.0-doc.tar.gz
$ ls seiscomp
bin  etc  include  lib  man  sbin  share

  4. Install all dependencies needed and prepare the environment.

    • This should be automatic for most distributions. Simply run the install script:

      $ ~/seiscomp/bin/seiscomp install-deps base
Distribution: Ubuntu 20.04

      This will generally prompt for your user’s password to allow sudo to install packages on your system.

    • On Ubuntu 18, Python 3 is installed, but not Python. Get it first:

      $ sudo apt-get install python libqtgui4

    • On Ubuntu 20 and newer, you may need libpython3-dev before you can use “install-deps”:

      $ sudo apt-get install libpython3-dev

    • Alternatively, for Mint 18 (Ubuntu 16.04):

      $ sudo apt-get update
$ sudo apt-get install libxml2 libboost-filesystem1.58.0
libboost-iostreams1.58.0 libboost-thread1.58.0 libboost-program-options1.58.0
libboost-regex1.58.0 libboost-signals1.58.0 libboost-system1.58.0 libssl1.0.0
libncurses5 libmysqlclient20 libpq5 libpython2.7 python-numpy mysql-server
mysql-client libqtgui4 libqt4-xml libqt4-opengl libqt4-sql-sqlite

  5. Database. For a MariaDB installation:

    $ seiscomp install-deps mariadb-server

    or a MySQL installation:

    $ seiscomp install-deps mysql-server

    Also, for better performance with a MariaDB/MySQL database, adjust the memory pool size and the restart MariaDB/MySQL server, as described in the Database Server Configuration section.

    For PostgreSQL, also see the detailed SeisComP Installation instructions.

    Warning

    For Ubuntu 18.04 and newer, take care with MariaDB/MySQL installation. Before the next step, you must set a root password for MariaDB/MySQL (not the Linux root password!).

    MariaDB:

    $ sudo mysql -e "SET old_passwords=0; ALTER USER root@localhost IDENTIFIED BY 'MyNewPassword'; FLUSH PRIVILEGES;"

    MySQL:

    $ sudo mysql -e "ALTER USER root@localhost IDENTIFIED WITH mysql_native_password BY 'MyNewPassword'; FLUSH PRIVILEGES;"

    Substitute MyNewPassword by your own password and remember it – you will need it in the next step. In case of problems, search the Internet, or the SeisComP forum thread (for logged-in forum members).

Configuration

Find a detailed description in section Getting Started with SeisComP and short guide below.

  1. You may set some system environment variables. For bash users, print the environment variables and copy them to your .bashrc

    $ ~/seiscomp/bin/seiscomp print env
export SEISCOMP_ROOT=/home/sysop/seiscomp
export PATH=/home/sysop/seiscomp/bin:$PATH
export LD_LIBRARY_PATH=/home/sysop/seiscomp/lib:$LD_LIBRARY_PATH
export PYTHONPATH=/home/sysop/seiscomp/lib/python:$PYTHONPATH
export MANPATH=/home/sysop/seiscomp/share/man:$MANPATH
export LC_ALL=C
source /home/sysop/seiscomp/share/shell-completion/seiscomp.bash

    The path to your home directory will likely differ from /home/sysop as shown above. Cut and paste your own output from the seiscomp print env command, not what is shown here. Edit your ~/.bashrc file, inserting the command from the output.

    $ vi ~/.bashrc

    Then reload the contents of .bashrc in your current environment

    $ source ~/.bashrc

    After this, you won’t have to type ~/seiscomp/bin/seiscomp as the seiscomp command will be added to your shell’s path.

    Hint

    If, when you attempt to run a SeisComP command such as scconfig or scolv, you receive an error message like

    scconfig: command not found

    then the most likely explanation is that you have not set your SeisComP environment variables correctly.

    Run the seiscomp command with the full path to where you installed. The seven lines of output are not actually run by the ‘seiscomp print env’ command; you need to cut and paste them into your shell to run them. You can also add these to your .bashrc, .profile, or equivalent file with commands to be run every time you log in.

  2. Run seiscomp setup and enter your preferred IDs and password. For the other fields, you can always accept the default values.

    $ seiscomp setup

    You should enter an appropriate short name (without spaces) for Agency ID and Datacenter ID. These are used for Arclink and Seedlink, and in the information describing data model objects such as origins and events.

  3. The seiscomp command is a wrapper, which controls the SeisComP modules. See System management. Run something by typing seiscomp followed by a command:

    $ seiscomp help
Available commands:
 install-deps
 setup
 shell
 enable
 disable
 print
 help

Use 'help [command]' to get more help about a command

  4. Start scmaster. As described in the Overview, these are needed for communication between the SeisComP database and the individual SeisComP modules.

    $ seiscomp start scmaster
starting scmaster

  5. Install all dependencies needed for the GUI:

    $ seiscomp install-deps gui

  6. Start the scconfig GUI

    $ seiscomp exec scconfig

    Learn more about scconfig in this documentation. You should see a screen/window like this.

    ../../_images/postinstall_scconfig.png

    First view of scconfig configurator.

  7. Run scrttv

    $ seiscomp exec scrttv

    After seeing the SeisComP splash screen, you’ll likely get an error message “Could not read inventory (NULL)”. After a new installation, that’s okay. Click that box away, and you’ll see a screen with “Enabled”, and “Disabled” tabs, and time along bottom axis as in the figure below. To see stations and data you will later need to add inventory and waveforms to your system.

    ../../_images/postinstall_scrttv.png

    First view of the scconfig configuration tool.

Congratulations, you’re done with this tutorial.