.. _global_mwpd: #### Mwpd #### Duration-amplitude moment magnitude Mwpd (Lomax & Michelini 2009), ported from Early-est 1.2.9. The vertical broadband is restituted to displacement, high-passed at the BRB-HP corner and integrated over the source duration T0; T0 is estimated from the high-frequency envelope. The amplitude processor emits the displacement integral (nm*s) and carries T0 as the amplitude period; the magnitude processor forms M0 and Mwpd with the distance, PREM depth and duration corrections. Description =========== :math:`M_{wpd}` is a per-station **duration--amplitude moment magnitude** for large earthquakes, determined from teleseismic *P* waveforms. It integrates the broad-band *P*-wave ground displacement over the apparent source duration :math:`T_0`, after Lomax & Michelini (2009), and is a port of the Mwpd implementation in Early-est (A. Lomax). Because it integrates over the whole source duration rather than taking the peak (as :math:`M_{wp}` does), it does **not saturate** for events with long rupture duration, such as tsunami earthquakes and great earthquakes. The plugin contributes both an amplitude processor and a magnitude processor of type ``Mwpd``. Both use the vertical broad-band component only. Method ====== Given the far-field *P* displacement :math:`u(t)` for a source of duration :math:`T_0`, the scalar seismic moment is (Tsuboi et al. 1995; Lomax & Michelini 2009) .. math:: M_0 = C_M \int_{t_P}^{t_P + T_0} u(t)\, \mathrm{d}t , where :math:`t_P` is the *P*-arrival time. The implementation accumulates the running displacement integral separately over its **positive and negative lobes** (to separate the direct *P* wave from later reflected/secondary phases of opposite polarity, eq. 3 of Lomax & Michelini 2009) and uses the larger of the two at :math:`T_0`. The moment magnitude follows the standard relation .. math:: M_{wpd}^{\mathrm{raw}} = \tfrac{2}{3}\left(\log_{10} M_0 - 9.1\right) - C_\Delta(\Delta, h) , with a distance correction :math:`C_\Delta` (INGV/Early-est, subtracted; zero for :math:`h>100` km), then a PREM step depth correction :math:`C_h(h)` and a moment-scaling term for great/slow events: .. math:: M_{wpd} = M_{wpd}^{\mathrm{raw}} + C_h(h) + r\,(M_{wpd}^{\mathrm{raw}} - 7.2)\cdot 0.45 , \qquad r = \mathrm{clip}\!\left(\tfrac{T_0-90}{110-90},\,0,\,1\right). The duration ramp :math:`r` engages only for :math:`T_0 > 90` s (the moment scaling for large interplate-thrust / tsunamigenic events, eq. 5a in Lomax & Michelini 2009). Amplitude ========= For each *P* pick on the vertical broad-band, the amplitude processor: #. restitutes counts to ground velocity (sensitivity gain) and high-passes with a Butterworth filter at a **0.005 Hz** corner (the Early-est BRB-HP filter); a low corner is essential to retain the long-period displacement that carries the moment of great earthquakes; #. single-integrates to displacement and accumulates the running double integral into positive/negative lobes; #. estimates the **apparent source duration** :math:`T_0` from the high-frequency envelope: the velocity is band-passed 1--5 Hz, squared and boxcar-smoothed, and :math:`T_0` is derived from the times at which this envelope last drops below 90/80/50/20 % of its peak; #. integrates over :math:`\min(T_0,\ t_S-t_P,\ \mathtt{signalEnd})` --- the :math:`S\!-\!P` cap (from a travel-time table) keeps the integral free of *S* and surface-wave energy. The amplitude carries the displacement integral (unit ``nm*s``); :math:`T_0` is carried as the amplitude period. In real-time application, the computation is progressive: the processing is updated as new data arrives and finalised once :math:`T_0` is resolved. Magnitude ========= The magnitude processor reads the displacement integral (``nm*s``) and :math:`T_0` (period) and applies the relations above, with the moment constant .. math:: C_M = 4\pi\,\rho\,V_p^{3}\,F_p \cdot \tfrac{10000}{90}\cdot 1000 \approx 4.68\times10^{21} (Tsuboi constant; :math:`\rho=3400`, :math:`V_p=7900`, :math:`F_p=2`). Since :math:`M_{wpd}` is already a moment magnitude, no further :math:`M_w` conversion is applied (SeisComP's per-station ``estimateMw`` step is the identity here); the network magnitude is a robust (median / trimmed-mean) average of the station :math:`M_{wpd}` values. Calibration =========== The implementation was validated against GCMT moment magnitudes for 972 events (:math:`M_w` 6.0--8.8, 2015--2026), processed through this algorithm with broad-band stations from global networks. :math:`M_{wpd}` tracks :math:`M_w^{\mathrm{CMT}}` along the 1:1 line with **no saturation** and no significant depth dependence. .. figure:: mwpd_calibration.png :width: 16cm :align: center :math:`M_{wpd}` (this plugin) versus GCMT :math:`M_w` for 972 events, coloured by source depth. Overall slope 1.02, mean difference +0.05, :math:`\sigma = 0.15`, correlation r = 0.95. Mean difference :math:`M_{wpd} - M_w^{\mathrm{CMT}}` by magnitude band: ============= ====== ===== ==== :math:`M_w` mean sigma N ============= ====== ===== ==== 6.0 -- 7.0 +0.07 0.14 831 7.0 -- 7.5 -0.05 0.13 94 7.5 -- 8.0 -0.04 0.20 40 8.0 -- 9.5 -0.09 0.16 7 ============= ====== ===== ==== and by source depth: ================ ====== ===== ==== depth (km) mean sigma N ================ ====== ===== ==== 0 -- 70 +0.07 0.16 702 70 -- 300 -0.02 0.13 175 300 -- 800 +0.01 0.10 95 ================ ====== ===== ==== These results are consistent with operational Early-est (slope ~1.01, :math:`\pm 0.13`) and with Lomax & Michelini (2009), which reports :math:`M_{wpd}` matching :math:`M_w^{\mathrm{CMT}}` within :math:`\pm 0.2`. A small residual bias remains at the low-magnitude end (mean :math:`M_{wpd}-M_w^{\mathrm{CMT}}\approx +0.07` for :math:`M_w` 6.0--7.0, within the :math:`\sigma\approx 0.14` scatter). Because :math:`M_{wpd}` is reported as a moment magnitude, no correction is applied by default, but any residual trend can be flattened per network without code changes using the standard :ref:`scmag` mechanisms: a linear station correction :math:`M_{wpd}' = a\,M_{wpd} + b` via ``magnitudes.Mwpd.multiplier`` / ``magnitudes.Mwpd.offset``, or a piecewise-linear proxy mapping :math:`M_w(M_{wpd})` via ``magnitudes.Mwpd.MwMapping`` (as used for other :math:`M_w` proxies). Operators should derive these from a regression against their own reference magnitudes. Early-est itself is deliberately conservative with :math:`M_{wpd}` at smaller magnitudes: it is not reported/alerted below :math:`M_{wpd}\approx 7.0` (``alert.mwpd_min``, default 6.95) and is only set as the event's preferred magnitude once :math:`M_{wpd}\gtrsim 8.0` (``preferred.min_value.mwpd``; A. Lomax, pers. comm., 2026, suggests this could be lowered to approximately 7.5). SeisComP's own preferred-magnitude selection (:ref:`scevent`) is a static per-type priority list rather than a value-gated threshold, so operators wanting equivalent behaviour should configure the :math:`M_{wpd}` priority accordingly: treat it with caution below :math:`M_w\approx 7` and avoid letting it override other magnitude types unless the event is confirmed large. Configuration ============= Add ``mwpd`` to the ``plugins`` parameter and enable the ``Mwpd`` amplitude and magnitude in :ref:`scamp` / :ref:`scmag` (or :ref:`scolv`). The defaults reproduce Early-est; the most important amplitude parameter is ``amplitudes.Mwpd.highpassCorner`` (0.005 Hz --- keep low). See the binding parameter descriptions for the full list. Because :math:`M_{wpd}` integrates over the source duration, it requires a long post-*P* window (up to ``signalEnd``), so the final value has higher latency than :math:`M_{wp}`. For faster tsunami early warning, Lomax & Michelini (2013) describe :math:`M_{wpd}\mathrm{(RT)}`, a real-time variant that uses a smaller minimum station distance and avoids some of the duration estimation and re-scaling; it is not implemented in this plugin. References ========== * Lomax, A. & Michelini, A. (2009). :math:`M_{wpd}`: a duration--amplitude procedure for rapid determination of earthquake magnitude and tsunamigenic potential from *P* waveforms. *Geophys. J. Int.* **176**, 200--214, doi:10.1111/j.1365-246X.2008.03974.x * Lomax, A. & Michelini, A. (2013). Tsunami early warning within five minutes. *Pure Appl. Geophys.* **170**, 1385--1395, doi:10.1007/s00024-012-0512-6 * Tsuboi, S. et al. (1995). Rapid determination of :math:`M_w` from broadband *P* waveforms. *Bull. Seismol. Soc. Am.* **85**, 606--613.