scmaster

The messaging system

Description

scmaster is the implementation of the messaging mediator.

Message Groups

scmaster provides the message groups. Configure

Queues

scmaster provides queues for separating the processing. Typically, the default queue production is used. To add new queues

  1. Define a new queue by adding a new profile with some name,

  2. Configure the profile parameters queues.$name.*,

  3. Register the queue in queues.

Scheme

scmaster provides unsecured and secured connection which is addressed by the scheme values scmp and scmps, respectively, in connection.server when connecting to the messaging. Read the concepts section for more details. scmps is in use when configuring interface.ssl.bind.

Database Access

scmaster reads from and writes to the database and reports the database connection to the clients of the messaging system (compare with the concepts section).

The database is configured per queue.

Single machine

When running all SeisComP modules on a single machine, the read and write parameters are typically configured with localhost as a host name.

Example:

queues.production.processors.messages.dbstore.read = sysop:sysop@localhost/seiscomp
queues.production.processors.messages.dbstore.write = sysop:sysop@localhost/seiscomp

Multiple machines

If the clients are located on machines different from the messaging, the host name of the read parameter must be available on the client machine and the client machine must be able to connect to the host with its name. If the database is on the same machine as the messaging, the host name of the write connection typically remains localhost.

Example for connecting clients on computerB to the messaging on computerA (compare with the concepts section).

  • Configuration of scmaster on computerA:

    queues.production.processors.messages.dbstore.read = sysop:sysop@computerA/seiscomp
queues.production.processors.messages.dbstore.write = sysop:sysop@localhost/seiscomp

  • Global configuration of client on computerB:

    connection.server = computerA/production

Module Configuration

etc/defaults/global.cfg
etc/defaults/scmaster.cfg
etc/global.cfg
etc/scmaster.cfg
~/.seiscomp/global.cfg
~/.seiscomp/scmaster.cfg

scmaster inherits global options.

defaultGroups

Default: AMPLITUDE, PICK, LOCATION, MAGNITUDE, FOCMECH, EVENT, QC, PUBLICATION, GUI, INVENTORY, CONFIG, LOGGING, SERVICE_REQUEST, SERVICE_PROVIDE, STATUS_GROUP

Type: list:string

The default set of message groups for each queue. Only used if a queues group list is unset (note: empty is not unset).

queues

Default: production, playback

Type: list:string

Enable messaging queues defined as profile in queues. The profile names are the final queue names.

Note

interface.* Control the messaging interface. The default protocol is “scmp” but “scmps” (secure protocol) is used when valid SSL certificate and key are configured.

interface.bind

Default: 0.0.0.0:18180

Type: ipbind

Local bind address and port of the messaging system. 0.0.0.0:18180 accepts connections from all clients, 127.0.0.1:18180 only from localhost.

interface.acl

Type: list:ipmask

The IP access control list for clients which are allowed to connect to the interface. Separate each IP with a space and put the entire list in double quotes, e.g. "127.0.0.1 192.168.1.2 192.168.0.0/16".

interface.socketPortReuse

Default: true

Type: boolean

SO_REUSEADDR socket option for the TCP listening socket.

Note

interface.ssl.* SSL encryption is used if key and certificate are configured.

interface.ssl.bind

Default: 0.0.0.0:-1

Type: ipbind

Additional local bind address and port of the messaging system in case SSL encryption is active.

interface.ssl.acl

Type: list:ipmask

The IP access control list for clients which are allowed to connect to the interface. See interface.acl for further details.

interface.ssl.socketPortReuse

Default: true

Type: boolean

SO_REUSEADDR socket option for the TCP listening socket.

interface.ssl.key

Type: path

interface.ssl.certificate

Type: path

Note

queues.* Set the parameters for each messaging queue. The queues are used when listed in the “queues” parameter. Several queues can be used in parallel. For queues with without databases leave the processor parameters empty.

Note

queues.$name.* $name is a placeholder for the name to be used and needs to be added to queues to become active.

queues = a,b
queues.a.value1 = ...
queues.b.value1 = ...
# c is not active because it has not been added
# to the list of queues
queues.c.value1 = ...
queues.$name.groups

Type: list:string

Define the list of message groups added to the queue. If unset, then the defaultGroups will be used. A queue will always add the default group "STATUS_GROUP". This parameter overrides defaultGroups.

queues.$name.acl

Default: 0.0.0.0/0

Type: list:ipmask

The IP access control list for clients which are allowed to join the queue. See interface.acl for further details.

queues.$name.maximumPayloadSize

Default: 1048576

Type: int

Unit: B

The maximum size in bytes of a message to be accepted. Clients which send larger messages will be disconnected. The default is 1MB.

queues.$name.plugins

Type: list:string

List of plugins required by this queue. This is just a convenience parameter to improve configurations readability. The plugins can also be added to the global list of module plugins.

Example: dbstore

queues.$name.processors.messages

Type: string

Interface name. For now, use "dbstore"to use a database.

Use empty for testing or playbacks without a database.

Note

queues.$name.processors.messages.dbstore.* Define the database connection parameters.

queues.$name.processors.messages.dbstore.driver

Type: string

Selected the database driver to use. Database drivers are available through plugins. The default plugin is dbmysql which supports the MYSQL database server. It is activated with the core.plugins parameter.

queues.$name.processors.messages.dbstore.read

Type: string

Set the database read connection which is reported to clients that connect to this server. If a remote setup should be implemented, ensure that the hostname is reachable from the remote computer.

queues.$name.processors.messages.dbstore.write

Type: string

Set the database write connection which is private to scmaster. A separate write connection enables different permissions on the database level for scmaster and clients.

queues.$name.processors.messages.dbstore.strictVersionMatch

Default: true

Type: boolean

If enabled, the plugin will check the database schema version and refuse to start if the version doesn’t match the latest version. If disabled and the an object needs to be stored, which is incompatible with the database schema, this object is lost. Leave this option enabled unless you know exactly what are you doing and what the consequences are.

http.filebase

Default: @DATADIR@/scmaster/http/

Type: path

The directory served by the http server at staticPath.

http.staticPath

Default: /

Type: string

The URL path at which html files and assets are available. All files under filebase will be served at this URL path.

http.brokerPath

Default: /

Type: string

The URL path at which the broker websocket is available.

Command-Line Options

scmaster [options]

Generic

-h, --help

Show help message.

-V, --version

Show version information.

--config-file arg

Use alternative configuration file. When this option is used the loading of all stages is disabled. Only the given configuration file is parsed and used. To use another name for the configuration create a symbolic link of the application or copy it. Example: scautopick -> scautopick2.

--plugins arg

Load given plugins.

-D, --daemon

Run as daemon. This means the application will fork itself and doesn’t need to be started with &.

Verbosity

--verbosity arg

Verbosity level [0..4]. 0:quiet, 1:error, 2:warning, 3:info, 4:debug.

-v, --v

Increase verbosity level (may be repeated, eg. -vv).

-q, --quiet

Quiet mode: no logging output.

--component arg

Limit the logging to a certain component. This option can be given more than once.

-s, --syslog

Use syslog logging backend. The output usually goes to /var/lib/messages.

-l, --lockfile arg

Path to lock file.

--console arg

Send log output to stdout.

--debug

Execute in debug mode. Equivalent to --verbosity=4 --console=1 .

--log-file arg

Use alternative log file.

--print-component arg

For each log entry print the component right after the log level. By default the component output is enabled for file output but disabled for console output.

--trace

Execute in trace mode. Equivalent to --verbosity=4 --console=1 --print-component=1 --print-context=1 .

Wired

--bind arg

The non-encrypted bind address. Format [ip:]port

--sbind arg

The encrypted bind address. Format: [ip:]port