scevent

Associates an Origin to an Event or forms a new Event if no match is found. Selects the preferred origin, magnitude and focal mechanism.

Description

As a consequence of a real-time system the SeisComP modules creates several origins (results of localization processes) for one earthquake or other seismic events because as time goes by more seismic phases are available. scevent receives these origins and associates the origins to events. It is also possible to import and associate origins from other agencies.

The main tasks of scevent are:

• Associate origins to events.

• Set the ID of events.

• Set the preferred origin from all available origins.

• Set the preferred magnitude from all available magnitudes.

• Set the preferred focal mechanism from all available focal mechanisms.

• Optional: Set the event type of automatic origins based on the plugin evrc and the hypocenter location of the preferred origin. This requires the configuration of the evrc plugin and of regions by BNA polygons.

Origin Association

scevent associates origins to events by searching for the best match of the new (incoming) origin to other origins for existing events:

• Associate origins belonging to belonging to the same seismic event to the same event object in SeisComP.

• Associate origins belonging to different seismic events to different event objects in SeisComP.

If a match is not found, a new event can be formed.

Origin match

The new origin is matched to existing origins by comparing differences in epicenter, origin time, and arrivals (associated picks). The new origin is matched to an existing origin which has the highest rank in the following three groups (1, 2, 3):

1. Location and Time (lowest)

   The difference in horizontal location is less than eventAssociation.maximumDistance (degrees) and the difference in origin times is less than eventAssociation.maximumTimeSpan.

2. Picks

   The two origins have more than eventAssociation.minimumMatchingArrivals matching picks. Picks are matched either by ID or by time depending on eventAssociation.maximumMatchingArrivalTimeDiff.

3. Picks and Location and Time (highest)

   This is the best match, for which both the location-and-time and picks criteria above are satisfied.

If more than one origin is found in the highest ranking class, then the first one of them is chosen.

Note

For efficiency events in the cache are scanned first and if no matches are found, the database is scanned for the time window eventAssociation.eventTimeBefore - eventAssociation.eventTimeAfter around the incoming Origin time. The cached events are ordered by eventID and thus in time.

No origin match

If no event with an origin that matches the incoming origin is found, then a new event is formed and the origin is associated to that event. The following criteria are applied to allow the creation of the new event:

• The agency for the origin is not black listed (processing.blacklist.agencies).

• The origin is automatic and it has more than eventAssociation.minimumDefiningPhases arrivals (associated picks).

Association of an origin to an event by matching picks.

Preferred Origin

The preferred origin is set by ranking of all associated origins. The ranking is controlled by eventAssociation.priorities and related configuration parameters.

Preferred Magnitude

The preferred magnitude is set by ranking of the summary magnitude and all network magnitudes of the preferred origin. The ranking is mainly controlled by eventAssociation.magTypes and eventAssociation.minimumMagnitudes and related configuration parameters.

Preferred Focal Mechanism

The most recent manual focal mechanism or, if no manual ones are unavailable, the most recent automatic focal mechnisms becomes preferred.

ID of Events

The ID of an event or eventID uniquely identifies an event. The ID is derived from the time of occurrence of the event within a year. As configured by eventIDPattern it typically consists of a prefix configured by eventIDPrefix and a string containing the year and a set of characters or numbers defining the time.

Journals

scevent can be commanded by journals to do a certain action. Journal entries are being received via the messaging bus to any of the subscribed groups. A journal entry contains an action, a subject (a publicID of an object) and optional parameters. Journals can be interactively sent to the messaging by scsendjournal.

If scevent has handled an action, it will send a reply journal entry with an action formed from the origin action name plus OK or Failed. The parameters of the journal entry contain a possible reason.

The following actions are supported by scevent:

EvGrabOrg(objectID, parameters)

Grabs an origin and associates it to the given event. If the origin is already associated with another event then its reference to this event will be removed.

Parameters

• objectID – The ID of an existing event

• parameters – The ID of the origin to be grabbed

EvMerge(objectID, parameters)

Merges an event (source) into another event (target). After successful completion the source event will be deleted.

Parameters

• objectID – The ID of an existing event (target)

• parameters – The ID of an existing event (source)

EvName(objectID, parameters)

Adds or updates the event description with type “earthquake name”.

Parameters

• objectID – The ID of an existing event

• parameters – An event name

EvNewEvent(objectID, parameters)

Creates a new event based on a given origin. The origin must not yet be associated with another event.

Parameters

• objectID – The origin publicID of the origin which will be used to create the new event.

• parameters – Unused

EvOpComment(objectID, parameters)

Adds or updates the event comment text with id “Operator”.

Parameters

• objectID – The ID of an existing event

• parameters – The comment text

EvPrefFocMecID(objectID, parameters)

Sets the preferred focal mechanism ID of an event. If a focal mechanism ID is passed then it will be fixed as preferred solution for this event and any subsequent focal mechanism associations will not cause a change of the preferred focal mechanism.

If an empty focal mechanism ID is passed then this is considered as “unfix” and scevent will switch back to automatic preferred selection mode.

Parameters

• objectID – The ID of an existing event

• parameters – The focal mechanism ID which will become preferred or empty.

EvPrefMagType(objectID, parameters)

Set the preferred magnitude of the event matching the requested magnitude type.

Parameters

• objectID – The ID of an existing event

• parameters – The desired preferred magnitude type

EvPrefMw(objectID, parameters)

Sets the moment magnitude (Mw) of the preferred focal mechanism as preferred magnitude of the event.

Parameters

• objectID – The ID of an existing event

• parameters – Boolean flag, either “true” or “false”

EvPrefOrgAutomatic(objectID, parameters)

Releases the fixed origin constraint. This call is equal to EvPrefOrgID(eventID, '').

Parameters

• objectID – The ID of an existing event

• parameters – Unused

EvPrefOrgEvalMode(objectID, parameters)

Sets the preferred origin based on an evaluation mode. The configured priorities are still valid. If an empty evaluation mode is passed then scevent releases this constraint.

Parameters

• objectID – The ID of an existing event

• parameters – The evaluation mode (“automatic”, “manual”) or empty

EvPrefOrgID(objectID, parameters)

Sets the preferred origin ID of an event. If an origin ID is passed then it will be fixed as preferred solution for this event and any subsequent origin associations will not cause a change of the preferred origin.

If an empty origin ID is passed then this is considered as “unfix” and scevent will switch back to automatic preferred selection mode.

Parameters

• objectID – The ID of an existing event

• parameters – The origin ID which will become preferred or empty.

EvRefresh(objectID, parameters)

Refreshes the event information. This operation can be useful if the configured fep region files have changed on disc and scevent should update the region information. Changed plugin parameters can be another reason to refresh the event status.

Parameters

• objectID – The ID of an existing event

• parameters – Unused

EvSplitOrg(objectID, parameters)

Remove an origin reference from an event and create a new event for this origin.

Parameters

• objectID – The ID of an existing event holding a reference to the given origin ID.

• parameters – The ID of the origin to be split

EvType(objectID, parameters)

Sets the event type to the passed value.

Parameters

• objectID – The ID of an existing event

• parameters – The event type

EvTypeCertainty(objectID, parameters)

Sets the event type certainty to the passed value.

Parameters

• objectID – The ID of an existing event

• parameters – The event type certainty

Plugins

• RegionCheck

  evrc plugin for scevent

Configuration

etc/defaults/global.cfg

etc/defaults/scevent.cfg

etc/global.cfg

etc/scevent.cfg

~/.seiscomp/global.cfg

~/.seiscomp/scevent.cfg

scevent inherits global options.

eventIDPrefix

Type: string

Prefix for all Event IDs

eventIDPattern

Type: string

Defines the pattern to generate an event ID.

%p : prefix

%Y : year

%[w]c: alpha character

%[w]C: upper case alpha character

%[w]d: decimal

%[w]x: hexadecimal

%[w]X: upper case hexadecimal

[w] is an optional width parameter. Default is %p%Y%04c.

processing.blacklist.eventIDs

Type: list:string

Defines a blacklist of event ids. The items of this list are only matches against %c, %C, %d, %x and %X of the eventIDPattern description. Year (%Y) and prefix (%p) are not matched. The match is case-sensitive, so blacklisting e.g. abcd would only match in combination with %c. If %C is used ABCD has to be blacklisted.

Note

eventAssociation.* Criteria defining if Origins are associated to an event and which Origins and magnitudes become preferred.

eventAssociation.minimumDefiningPhases

Type: int

Minimum number of Picks for an Origin that is automatic and cannot be associated with an Event to be allowed to form an new Event. Default is 10.

eventAssociation.minimumScore

Type: double

Minimum score of an automatic Origin to be allowed to form an new Event. This requires an activated score plugin and a score processor. Configure “score” for defining the score processor and the score processor parameters. If minimumScore is defined, “minimumDefiningPhases” has no effect on association as this phase check will be superseded by the score check. It is the task of the score processor to evaluate a proper score for all input Origins.

eventAssociation.ignoreFMDerivedOrigins

Type: boolean

Ignore and do not associate Origins derived from CMT/MT inversions. Default is true.

eventAssociation.eventTimeBefore

Type: double

Unit: s

Time range before the Origin time of an incoming Origin to search for matching events. Default is 1800.

eventAssociation.eventTimeAfter

Type: double

Unit: s

Time range after the Origin time of an incoming Origin to search for matching events. Default is 1800.

eventAssociation.minimumMatchingArrivals

Type: int

Minimum number of matching picks between two Origins to be associated to the same event. Default is 3.

eventAssociation.maximumMatchingArrivalTimeDiff

Type: double

Unit: s

Negative time window: compare only pickIDs to find matching arrivals. A non negative value (including 0) compares pick times regardless of the pickID. Pass: |pick1.time - pick2.time| <= threshold Default is -1.

eventAssociation.compareAllArrivalTimes

Type: boolean

This parameter is only used in conjunction with eventAssociation.maximumMatchingArrivalTimeDiff. If a station has multiple associated arrivals for a particular event, this flag defines if the time distance of a new pick to all arrivals must be within eventAssociation.maximumMatchingArrivalTimeDiff or if one matching arrival is enough. Default is true.

eventAssociation.allowLooseAssociatedArrivals

Type: boolean

Allows to match picks that are associated with weight 0. Default is false.

eventAssociation.maximumTimeSpan

Type: double

Unit: s

Associates an Origin with an existing event if the Origin time differs not more than 60 seconds unless the minimumMatchingArrivals criteria matches. Default is 60.

eventAssociation.maximumDistance

Type: double

Unit: degrees

Allowed location difference between an incoming Origin compared with preferred Origins to get associated. Default is 5.

eventAssociation.magTypes

Type: list:string

Magnitude type priority list for becoming a preferred magnitude for an event.

Example:

M, mBc, Mw(mB), Mwp, ML, MLh, MLv, mb Default is M.

eventAssociation.enableFallbackMagnitude

Type: boolean

If true, one magnitude will be preferred even if magnitude criteria are not fullfilled. Default is false.

eventAssociation.minimumMagnitudes

Type: int

Minimum number of station magnitudes referenced to a network magnitude to become a preferred magnitude. Default is 4.

eventAssociation.minMwCount

Type: int

Minimum number of station magnitudes required for Mw(mB) to be considered as preferred magnitude. Default is 8.

eventAssociation.mbOverMwCount

Type: int

Minimum number of station magnitudes which ensures that Mw(mB) will be preferred and not mb. Default is 30.

eventAssociation.mbOverMwValue

Type: double

Average between mb and Mw(mB) which must be exceeded to become Mw(mB) preferred. Default is 6.

eventAssociation.magPriorityOverStationCount

Type: boolean

If false then the station count rules out the magnitude priority which is only taken into account if two magnitudes have the same station count.

If true then the priority rules out the station count which is only taken into account if two magnitudes have the same priority. Default is false.

eventAssociation.priorities

Type: list:string

The general priority list to decide if an Origin becomes preferred. The priority decreases in the order of the parameters. This list is not used unless this parameter is activated.

Empty priority list: scevent replicates the default hard wired behaviour: AGENCY, STATUS, PHASES_AUTOMATIC, TIME_AUTOMATIC

Each item in the list corresponds to a check that is performed. Each check computes a score of the incoming Origin (s1) and the current preferred Origin (s2). If the s1 is lower than s2, the incoming Origin is rejected and does not become preferred. All subsequent checks are ignored. If s1 is equal to s2, the next check in the list is performed. If s1 is larger than s2, the Origin becomes preferred and all subsequent checks are ignored.

Available tokens:

AGENCY: check based on agency priorities

AUTHOR: check based on author priorities

MODE: evaluation mode priority: 0 = unset, 1 = automatic, 2 = manual, manual over-rules automatic

STATUS: priority combined from evaluation status and evaluation mode: -100 = status is rejected, -1 = status is reported, 0 = status is preliminary or status is unset and mode is automatic, 1 = status is confirmed or status is unset and mode is manual, 2 = status is reviewed, 3 = status is final,

METHOD: check based on the method priorities

PHASES: higher phase count = higher priority

PHASES_AUTOMATIC: only checks phase priorities for incoming automatic Origins

RMS: lower rms = higher priority

RMS_AUTOMATIC: only check RMS on incoming automatic Origins

TIME: more recent Origins (creationTime) have higher priorities

TIME_AUTOMATIC: only check creationTime priority on incoming automatic Origins

SCORE: evaluates the score according to a configured ScoreProcessor and prefers the Origin/Focalmechanism with the highest score. Default is AGENCY, STATUS, PHASES_AUTOMATIC, TIME_AUTOMATIC.

eventAssociation.agencies

Type: list:string

The agencyID priority list. When the eventtool comes to the point to select a preferred Origin based on AGENCY it orders all Origins by its agency priority and selects then the best one among the highest priority agency. It also defines the agency priority for custom priority checks (eventAssociation.priorities).

The parameter is only considered when defined in “priorities”.

eventAssociation.authors

Type: list:string

The author priority list. When the eventtool comes to the point to select a preferred Origin based on AUTHOR it orders all Origins by its author priority and selects then the best one among the highest priority author. It also defines the author priority for custom priority checks (eventAssociation.priorities).

The parameter is only considered when defined in “priorities”.

eventAssociation.methods

Type: list:string

The method priority list. When the eventtool comes to the point to select a preferred Origin based on METHOD it orders all Origins by its methodID priority and selects then the best one among the highest priority method. It also defines the method priority for custom priority checks (eventAssociation.priorities). A defined method string must match exactly the string in Origin.methodID.

The parameter is only considered when defined in “priorities”.

eventAssociation.score

Type: string

Defines the ScoreProcessor interface to be used along with priority “SCORE”.

The parameter is only considered when defined in “priorities”.

eventAssociation.declareFakeEventForRejectedOrigin

Type: boolean

If the preferred Origin has evaluation status ‘rejected’, the Event type will be set to ‘not existing’ unless the Event type has been fixed by an operator or the preferred Origin has been fixed. Default is false.

eventAssociation.delayTimeSpan

Type: int

Unit: s

Configures a timespan to delay Event creation. If a new Origin arrives which cannot be associated to an existing Event, delay the Event creation for a certain timespan.

eventAssociation.region.rect

Type: string

Region in which scevent is allowed to create Events.

eventAssociation.region.minDepth

Type: double

Unit: km

Minimum depth for which scevent is allowed to create Events.

eventAssociation.region.maxDepth

Type: double

Unit: km

Maximum depth for which scevent is allowed to create Events.

Note

eventAssociation.delayFilter.* The delayFilter group configures an Origin filter to activate the delay feature for this Origin. If more than one filter is given they are combined with AND.

eventAssociation.delayFilter.agencyID

Type: string

The agencyID of the Origin to be delayed.

eventAssociation.delayFilter.author

Type: string

The author of the Origin to be delayed.

eventAssociation.delayFilter.evaluationMode

Type: string

The evaluation mode of the Origin to be delayed. Can be either “manual” or “automatic”.

RegionCheck extension

evrc plugin for scevent

Note

rc.* Test if events lie within or outside a region. Events within a region are flagged as positive, outside as negative. The event type is set accordingly. Add the plugin “evrc” to the plugins parameter to make this feature available.

rc.regions

Type: list:string

The list of closed BNA polygon names defining regions for flagging event as positive or negative. A polygon name defines a positive region but names with prefix ! (exclamation mark) define negative regions. Evaluation is done in the order of the polygons. The last matching criteria applies and the event type is set accordingly.

Default: If events are not positive or are negative regions the event type is set to “outside of network interest”. Default: “!reject”, use “accecpt” to overwrite the default.

Examples:

Events are flagged positive within the polygon “germany”:

germany

All events are flagged positive but events within the polygon “quarries” are negative:

accept,!quarries

Events within the polygon “germany” are flagged positive but all other events and events within the polygon “quarries” are negaitve:

germany,!quarries

All events are flagged positive but events within the polygon “germany” are negative and all events within the polygon “saxony” are positive:

accept,!germany,saxony Default is !reject.

rc.readEventTypeFromBNA

Type: boolean

Read the event type, minDepth and maxDepth from the BNA polygon header. The header may contain the values, e.g. header of a polygon with name “quarry”:

“quarry”,”rank 1”,”eventType: quarry blast, minDepth: -5, maxDepth: 10”,13

When eventType is set, it supersedes eventTypePositive and eventTypeNegative. When not set, eventTypePositive and eventTypeNegative are considered. Default is false.

rc.eventTypePositive

Type: string

New type of an event which is flagged positive. Ignored if readEventTypeFromBNA is active.

Empty: Do not set type

rc.eventTypeNegative

Type: string

New type of an event which is flagged negative. Ignored if readEventTypeFromBNA is active.

Empty means default: “outside of network interest” Default is "outside of network interest".

Command-line

Generic

-h, --help

show help message.

-V, --version

show version information

--config-file arg

Use alternative configuration file. When this option is used the loading of all stages is disabled. Only the given configuration file is parsed and used. To use another name for the configuration create a symbolic link of the application or copy it, eg scautopick -> scautopick2.

--plugins arg

Load given plugins.

-D, --daemon

Run as daemon. This means the application will fork itself and doesn’t need to be started with &.

--auto-shutdown arg

Enable/disable self-shutdown because a master module shutdown. This only works when messaging is enabled and the master module sends a shutdown message (enabled with –start-stop-msg for the master module).

--shutdown-master-module arg

Sets the name of the master-module used for auto-shutdown. This is the application name of the module actually started. If symlinks are used then it is the name of the symlinked application.

--shutdown-master-username arg

Sets the name of the master-username of the messaging used for auto-shutdown. If “shutdown-master-module” is given as well this parameter is ignored.

-x, --expiry time

Time span in hours after which objects expire.

-O, --origin-id publicID

OriginID to be associated. When given no messages are sent. Only the status of the association is written to stdout.

Verbosity

--verbosity arg

Verbosity level [0..4]. 0:quiet, 1:error, 2:warning, 3:info, 4:debug

-v, --v

Increase verbosity level (may be repeated, eg. -vv)

-q, --quiet

Quiet mode: no logging output

--component arg

Limits the logging to a certain component. This option can be given more than once.

-s, --syslog

Use syslog logging back end. The output usually goes to /var/lib/messages.

-l, --lockfile arg

Path to lock file.

--console arg

Send log output to stdout.

--debug

Debug mode: –verbosity=4 –console=1

--log-file arg

Use alternative log file.

Messaging

-u, --user arg

Overrides configuration parameter connection.username.

-H, --host arg

Overrides configuration parameter connection.server.

-t, --timeout arg

Overrides configuration parameter connection.timeout.

-g, --primary-group arg

Overrides configuration parameter connection.primaryGroup.

-S, --subscribe-group arg

A group to subscribe to. This option can be given more than once.

--start-stop-msg arg

Sets sending of a start- and a stop message.

Database

--db-driver-list

List all supported database drivers.

-d, --database arg

The database connection string, format: service://user:pwd@host/database. “service” is the name of the database driver which can be queried with “–db-driver-list”.

--config-module arg

The configmodule to use.

--inventory-db arg

Load the inventory from the given database or file, format: [service://]location

--db-disable

Do not use the database at all